lumu05

Alright lads i fitted a knocklink today and was just wondering is it normal not too get any green lights up even at 7000 rpm.I know that the sensor is working cause i got a mate too bang beside it.Even then it takes a good smack too get green,and its on low sensitivity ,he took the 12v from the hazard switch i think, is this ok or where would be better.Any comment would be appriciated cheers

jockc79

is the knocklink proparly calibrated u need to calibrate it when fitting the thing

KEVWRX95

I have mine on the most sensitive setting, so to see the first green light flicker now and then is fine, which mine does. I would rather see it working than having det and not realising because it is on the lowest sensitivity.
Kev

lumu05

yeh its on the lowest sensetivity where did you take its power from mate.my friend took it from the hazard switch and when i turn on the lights the 2 green flick on for a second i dont think its working right what too do?

Comper100

I took mine direct from the ignition live on the column, its best to leave them on max sensitivity which is fully clockwise.

lumu05

it must be ok thats the way i have it, i should be happy so not a peep out of it cheers lads