please help fault 33
#1
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
hi everyone, last week i became the proud new owner of my first scoob.i have a 1996 import wrx wagon . i have waited 1 week to get registered with dvla .at last i have driven it but to my dissmay i have had the engine light come on and a loss of power at about 3500 rpms coughing and backing off,if driven sensibly it is fine .i have checked the diagnostics and the code is 33 which if i am correct is the speed sensor . does anyone know where this is and how to get to it? also would it be something that i could do myself or would i need to put it into a garage ? thanks for any advice given.alex
#2
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
does your speedo work? Has it been converted to mph?
If so it could be a problem with the converter/de limiter not connected properly. Check nr the gearbox dipstick and you will see the cable going into the gearbox (you will probably have a little rectangular unit there), make sure that it is seated correctly.
If so it could be a problem with the converter/de limiter not connected properly. Check nr the gearbox dipstick and you will see the cable going into the gearbox (you will probably have a little rectangular unit there), make sure that it is seated correctly.
#3
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
yes i have fitted a converter for the speedo which at the moment cant be connected properly as its not working.but would that account for the engine cough and splutter. thanks alex
Thread
Thread Starter
Forum
Replies
Last Post
Phil3822
Lighting and Other Electrical
20
27 September 2015 07:39 PM
Adam Kindness
ScoobyNet General
0
15 September 2015 03:31 PM