Has anyone got, or can give me a step-by-step guide to removing the turbo on a 2005 UK STi?

Any advice or helpful hints would be appreciated.

Cheers,
Simon

 

bttt

 

http://206.13.93.15/STi_Stuff/STi_Manual/sti_dir.htm

Saw this on Scoobynet thought it might be of use. I have recently removed and replaced my turbo on my bugeye STi to replace up-pipe. A couple of bits of advise that might help.
1. Have a digital camera and take plenty of pictures, they will be useful during rebuild if you get stuck.
2. Take your time as somethings are not quite as they seem especially when rebuilding, thought all I had to do was bolt on the coolant pipes and finished. WRONG they were in the wrong place so I had to strip it out again!
3. Have some plasters to hand. Things are a bit tight for space and for the bolts

 

cheers mate,

thanks for your help