link CDL to toad ai606
#1
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi there, ive got a Toad ai606 cat1 alarm system on my impreza. All working fine. Trying to link it to the existing subaru central locking control box. The toad alarm has 6 wires although i think i may only need to connect 4 according to the manual?
I have 3 wires for the LOCK part, and 3 wires for the UNLOCK part, one lock wire to conect to NC, one for NO and COM, and 3 the same for the unlock part. I know that these abbreivations are normally open, normally closed etc as part of the relay but looking at the central locking "brain" fitted to the car (has about 10-12 wires coming from it) im a bit puzzled to as where i should be connecting them?
I've found the ones that pulse 12v when i lock and unlock which im presuming i have to connect either NO or NC to but after that im a bit out of ideas.
Anyone help me?
thanks in advance
Dave
I have 3 wires for the LOCK part, and 3 wires for the UNLOCK part, one lock wire to conect to NC, one for NO and COM, and 3 the same for the unlock part. I know that these abbreivations are normally open, normally closed etc as part of the relay but looking at the central locking "brain" fitted to the car (has about 10-12 wires coming from it) im a bit puzzled to as where i should be connecting them?
I've found the ones that pulse 12v when i lock and unlock which im presuming i have to connect either NO or NC to but after that im a bit out of ideas.
Anyone help me?
thanks in advance
Dave
#2
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
OK, this is a diagram for the car's CDL for drivers side, which i think i need to connect to?
On the right of that is the bit from the TOAD install manual telling me what the wires need to be connected to.
Can Anyone Help?
thanks
![](http://fylde-it.co.uk/scoob/locking.JPG)
Also Found THIS in another TOAD ai606 install manual.
On the right of that is the bit from the TOAD install manual telling me what the wires need to be connected to.
Can Anyone Help?
thanks
Also Found THIS in another TOAD ai606 install manual.
Last edited by trbd; 21 April 2006 at 02:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM