Standard back box internals..
#1
Standard back box internals..
Now this is going to sound like a funny question but does anyone know what sort of design is used on the standard back boxes.
The box in question is from a 2006 WRX, it has a single 3.5" exit..
I assume this is not a straight through pipe but my question is does it use a single baffle plate or do the inlet and outlet feed from different chambers? If its a single baffle plate like most "OEM" performance items its a simple case of "smashing the **** out of it" as they say to get some growl.. But with the latter if I carry out the same operation it will be fubar'ed.
The box in question is from a 2006 WRX, it has a single 3.5" exit..
I assume this is not a straight through pipe but my question is does it use a single baffle plate or do the inlet and outlet feed from different chambers? If its a single baffle plate like most "OEM" performance items its a simple case of "smashing the **** out of it" as they say to get some growl.. But with the latter if I carry out the same operation it will be fubar'ed.
#2
Scooby Regular
Joined: Nov 2004
Posts: 1,959
Likes: 0
From: In a 405 BHP/360 ft/lb P1 with SN superstar Sonic dog at my side!
Good luck when you put your car in the 'for sale' forum.
"lovingly maintained, no bodges, with no expense spared by competent home mechanic"
£1500 ONO
BTT
BTT
BTT
BTT
BTT
BTT
..........
"lovingly maintained, no bodges, with no expense spared by competent home mechanic"
£1500 ONO
BTT
BTT
BTT
BTT
BTT
BTT
..........
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM