Right guys, just fitted AVCR in MY97,
Come to take it up the road, the check light has come on and it seems to fuel cut around 4k.
Ive checked the wiring 5 times now and all seems ok so to me it must be a piping issue.
This is how ive connected it:

Removed original Boost pressure solenoid, fitted new one, connected 'NO' on new valve to the hot side of the turbo ( the little nipple on turbo outlet going to intercooler) connected 'COM' to the actuator.

Connected the new pressure sensor with 'T' between the pipe that goes between the manifold and the other original sensor next to where the original boost pressure solonoid was.

the only thing that seems to be amiss (to me) is it says on page 42 of the fitting instructions ' subaru vehicles require a WAY to connect the solenoid valve'

any ideas guys, its driving me mad!

cheers
Lee.

 

sounds like coilpacks mate.

 

right, just plugged old sensor back in, the check light has gone out!
(not piped up) can anyone confirm if how ive connected the pipes are correct?

 

must be right, car drives fine now!