Where to get collars for blitz 850 injectors
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2006
Location: Skotchland
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Ive bought the above injectors and also the cups from zen performance but the collar of the injector doesnt sit well in the rail. If I use the standard rubber collar seal from the standard injector on the blitz injector the injector site ok and looks like it will seal but I doubt it will with 3.5bar of pressure behind it. Are there other collar adaptors for these injectors?
Thanks
Thanks
#2
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
The Blitz injectors you have are not phase 2 injectors, but injectors from a Mazda RX-7. The problem you are having is the adaptors are for a proper Phase 2 injector like those on OE subaru applications, and the Nismo style 550(yellow) and 740(red) injectors. What o-rings do you have at the nozzle end of the injector?
You should be able to buy the correct adaptors for these injectors, they are the same basic type as the Sard injectors. We have some other adaptors specific to the Denso injector, they may work, but they are normally fitted with a collar at the top of the injector too.
Paul
You should be able to buy the correct adaptors for these injectors, they are the same basic type as the Sard injectors. We have some other adaptors specific to the Denso injector, they may work, but they are normally fitted with a collar at the top of the injector too.
Paul
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM