Help!!! Car wont start after fitting injectors
23 June 2006 | 07:59 AM
#1
Thread Starter
Scooby Regular
Joined: Jun 2006
Posts: 1,568
Likes: 0
From: South West
Help!!! Car wont start after fitting injectors
Help! Help! Took my car upto scoobyclinic yesterday to have 800cc injectors and a remap only to find they couldn't get the car started. Although no remap yet, the car just didn't want to fire - they checked the plugs after about 10 attempts to start and they were dry.
The fuel pressure is fine, 3 bar, and the reg seems to be working.
The impedance of the injectors were checked out okay, ie high.
What's it likely to be?
The fuel pressure is fine, 3 bar, and the reg seems to be working.
The impedance of the injectors were checked out okay, ie high.
What's it likely to be?
23 June 2006 | 01:33 PM
#3
Thread Starter
Scooby Regular
Joined: Jun 2006
Posts: 1,568
Likes: 0
From: South West
Scoobyclinic should look at it later today which is a pain as I'm supposed to get the car mapped tomorrow morning! It really looks like the injectors are naff, checking ecu readings will confirm this.
Trouble is, I'm having trouble trying to get replacement parts from the supplier - flat4online - I'm not getting any further response from them so how can I get this sorted...AAAAAAAAAAAHHHHHHHHHHHH!
Trouble is, I'm having trouble trying to get replacement parts from the supplier - flat4online - I'm not getting any further response from them so how can I get this sorted...AAAAAAAAAAAHHHHHHHHHHHH!
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 10:11 AM