Gas Door not Opening...
#2
I assume you are talking about the Petrol flap. The cable may well have come off at the flap end (or snapped but I doubt it). You might be able to access this area from within the boot. You'll have to take the trim out and have a look around. Im sure someone will be along shortly to confirm how this is done.
#6
When the flap is open get someone to pull the lever in the car and see if you can see the release mechanism move at all ......... like I said earlier its probably just the cable out of its locating lug ..... take the trim out of the inside of the boot and you'll probably see the problem instantly and easily fix it.
#7
We'll i got in there and the cable is in the house correctly but, it has too much free play. Is there a tension adjustment on the cable some where?? Thanks for your help this is driving me nuts.!!!
Trending Topics
#9
I dissassembled the "boot" end and when i pull the release leaver the plunger wil moved and the cable moves. But when i reassemble, there is a slit cut that i can see the cable moving but it is too long.
So what I have conluded..
Both "lead" ends are attached.
Cable is too long.
I tried to take the "leaver" end apart but cannot get it to come up off the floor... The bolt on the bottom, i can't tell what kind of bolt it is to take it off..
So any thoughts..
So what I have conluded..
Both "lead" ends are attached.
Cable is too long.
I tried to take the "leaver" end apart but cannot get it to come up off the floor... The bolt on the bottom, i can't tell what kind of bolt it is to take it off..
So any thoughts..
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM