POWER DIVE AT HIGH BOOST
11 April 2007 | 08:52 PM
#1
Thread Starter
Scooby Regular
Joined: Apr 2007
Posts: 89
Likes: 0
From: Southend on sea
POWER DIVE AT HIGH BOOST
hi guys having few troubles i recently installed a manual boost controller into my wrx estate import but because it is a auto when the kick down, kicks in it dies then picks up again im only running 0.7 bar of boost ? help please
take it no one knows or no one wants to help
11 April 2007 | 10:02 PM
#3
How have you plumbed in the manual Boost Controller ??
Is it the correct way around ? & in between the turbo Boost Nipple & the wastgate nipple.
Then blank off the pipes that lead back to the Boost control solenoid, So that all that is piped up between the turbo & the wastegate is the Manual Boost Controller.
What was the boost before you fitted the controller ?
Fitting Guide Here
Dean
Is it the correct way around ? & in between the turbo Boost Nipple & the wastgate nipple.
Then blank off the pipes that lead back to the Boost control solenoid, So that all that is piped up between the turbo & the wastegate is the Manual Boost Controller.
What was the boost before you fitted the controller ?
Fitting Guide Here
Dean
Last edited by DeanF; 11 April 2007 at 10:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM