I have a 2004 Blobeye which has been de-tangoed, the problem is that one of the lights is now quite badly steamed up on the inside.

What is the best way to rid the light of the steam and can I apply a coat of silicone around the edges of the light after having done this? Or does anyone have any other suggestions?

 

i had same problem on 1 of mine after de-tango had to remove the lamp and the lens again.once off dug out the old silicone and put a new bead of glazing sealent in,i just left the main beam bulb out for a few days to allow new silicone to dry fully
no problems since

 

Cheers - how hard is it to remove the lens?

 

you need to either put lamp in the oven or use a hair dryer.

put de-tango in the search and it will bring up how to do it

 

Put a piece of card over the lens and turn the lights on. The heat from the lamp will soon dry it out, but be carefull and do not leave it on for too long because it will crack the lens due to the heat build up.

 

I have a HID conversion on the lights - will this make a difference to that procedure?