Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Running at half power???

Thread Tools
 
Search this Thread
 
Old 10 July 2007 | 08:18 PM
  #1  
rossd0001's Avatar
rossd0001
Thread Starter
Scooby Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
Default Running at half power???

Hi guys,, I signed up today in the hope that one of you may be able to shed some light on this subject...

Had my 95impreza inport for just over a year now!! Got a K&N, Baily dump Valve and I had the exhaust done!! All singing and all dancing until last week. Friday on the way home from work I noticed a massive lack in power.

The dump valve has stopped all together and the K&N witch used to suck louder than the exhaust is also dead... I am also getting nothing from the turbo....

The real odd thing is that there is no other symtoms.... Car starts fine, turns over fine... No smoke or noises... Nothing.... Its like someone has switched it to half power????


Any ideas?
Old 10 July 2007 | 08:21 PM
  #2  
funkyspider's Avatar
funkyspider
Scooby Regular
 
Joined: Nov 2005
Posts: 1,335
Likes: 0
From: Lancashire & District Subaru Owners
Default

Does it still accelerate through the revs ok (even tho down on power). Just wondering if the ecu has put itself into limp home mode which restricts boost and has a low rev limit. If you have a boost gauge does it only boost to around 0.5bar now ?

Could also be boost control solenoid needs cleaning or a wastegate stuck problem.
Old 10 July 2007 | 08:23 PM
  #3  
rossd0001's Avatar
rossd0001
Thread Starter
Scooby Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
Default

No boost guage but ECU was my first thought!! If i really push it i can get a small squeek from the dump valve.. I can also get it through the revs fine all be it alot slower than before!
Old 10 July 2007 | 09:55 PM
  #4  
rossd0001's Avatar
rossd0001
Thread Starter
Scooby Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
Default

I got it booked into the subaru garage tomorrow at 9am,, but the last time i did that the only thing they did not want to replace was me!!! They do go a bit over the top... But I do need to find this problem and get it fixed ASAP!

Anyone else have any ideas??
Old 11 July 2007 | 11:05 PM
  #5  
rossd0001's Avatar
rossd0001
Thread Starter
Scooby Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
Default

Problem solved....... Waste Gate Actuator had come off!
Old 12 July 2007 | 12:53 AM
  #6  
Kjartan's Avatar
Kjartan
Scooby Regular
 
Joined: Sep 2006
Posts: 106
Likes: 0
From: Iceland
Default

haha, tought it could be that, was going to sugest that yesterday but somehow didn't.. happened to me once, circlip fell of and the arm disconnected itself from the wastegate
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
27 April 2022 12:15 AM
MH-Racing
Subaru Parts
18
18 October 2015 05:49 PM
aaron_ions
General Technical
1
17 September 2015 11:42 AM
BHPvstorque
Subaru Parts
2
16 September 2015 09:45 PM




All times are GMT +1. The time now is 11:29 PM.