Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Turbo troubles!

Thread Tools
 
Search this Thread
 
Old 22 July 2007 | 05:40 PM
  #1  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default Turbo troubles!

Went to rolling road friday(tourque of the devil) been told i may have a worn turbo/seals oil smoke coming out of exhaust on overrun only the turbo i have fitted is a TD05H been told hard to refurb better to get a new one seen this one on ebay(usa)

eBay Motors: TD05H 16G TURBOCHARGER TD05 H TURBO CHARGER ECLIPSE EVO (item 260140138795 end time Jul-22-07 18:44:27 PDT)

Does anyone know if this will fit my 94sti import as this is a lot cheaper than buying in uk

My problem is it says on the advert fits ECLIPSE EVO/TALON/PLYMOUTH LASER does anyone know if this will fit my scoob as its the same turbo number td05h
Old 22 July 2007 | 05:54 PM
  #2  
mark28's Avatar
mark28
Scooby Regular
 
Joined: Mar 2005
Posts: 729
Likes: 0
From: "Speed has never killed anyone, suddenly becoming stationary...Now that's what gets you."
Default

no it will not fit. keep hold of your money

oh and try putting a post up in the wanted section.
Old 22 July 2007 | 06:05 PM
  #3  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default

cheers m8
Old 22 July 2007 | 06:53 PM
  #4  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default

Anyone recommend a good turbo reconditioners or turbo exchange
Old 22 July 2007 | 08:11 PM
  #5  
johnnyroper's Avatar
johnnyroper
Scooby Regular
 
Joined: Dec 2006
Posts: 1,213
Likes: 0
From: at the petrol station again!!!
Default

Originally Posted by johnnywrx
Anyone recommend a good turbo reconditioners or turbo exchange


i have changed seals and bearings on my td05h it was an easy job,hardest part was removing/refitting the big circlip that holds the compressor housing on,

the refurb kit cost about £50-60
Old 22 July 2007 | 08:46 PM
  #6  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default

Originally Posted by johnnyroper
i have changed seals and bearings on my td05h it was an easy job,hardest part was removing/refitting the big circlip that holds the compressor housing on,

the refurb kit cost about £50-60

Cheers is there any specialist tools needed i've been warned about the balance bar is this a issue
Old 23 July 2007 | 01:21 AM
  #7  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default

Old 23 July 2007 | 07:29 PM
  #8  
johnnyroper's Avatar
johnnyroper
Scooby Regular
 
Joined: Dec 2006
Posts: 1,213
Likes: 0
From: at the petrol station again!!!
Default

[QUOTE=johnnywrx;7128878]Cheers is there any specialist tools needed i've been warned about the balance bar is this a issue[/QUOTE

no special tools required just internal circlip circlip pliers and a small flat blade

i dont see balancing is an issue as you are only changing bearings/seals

try home or have a search on fleabay for rebuild kits
Old 23 July 2007 | 07:45 PM
  #9  
johnnywrx's Avatar
johnnywrx
Thread Starter
Scooby Regular
 
Joined: May 2007
Posts: 364
Likes: 0
From: Hayes,Middlesex
Default

Sounds like the job cheers m8 got quotes today for replacement turbo and fell off my chair
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Abx
Subaru
22
09 January 2016 06:42 PM
kenc
Wanted
6
02 October 2015 10:12 PM
Tidgy
Non Scooby Related
31
02 October 2015 09:34 AM
madmover
Member's Gallery
4
28 September 2015 11:46 AM




All times are GMT +1. The time now is 11:32 PM.