gingerish

im looking for the best standard ecu to run the tdo5 as i look and there is no end of ecu numbers and they all seem to run the same car lol any help is good thanks

orbix

Z4

nickwrxstiV2

Z4 is the best but any WRX TD05 ECU will fit. Make sure you don't get an STI ECU as it will have the raised rpm level.

You could buy an ESL daughterboard chip to put in your new ECU, makes a marked improvement. Speak to ESL, they might be able to give you a daughterboard that fits your current ECU, but runs the TD05 at ahigher than standard boost. May be a better idea for £195. Speak to them.

Nick.

myblackwrx

iTrader: (1)

PolarPerformance do the esl style chip but also a remappable daughter board.

nickwrxstiV2

The ESL daughter board at £195 is remappable AFAIK.

myblackwrx

iTrader: (1)

Just had a quick look on their website (+£50 for the software) and it looks like you're correct but it seem unless you go to PTS you have to do it yourself (which would be a good way to learn i suppose but not something i would try)

orbix

I thought there was 2 products.

The old esl daughter board (non mappable) £195
or
The new live map board £250 with base map or £550 with it mapped to your car.

I could be wrong though.

nickwrxstiV2

I think the software is free -

http://www.enduringsolutions.co.uk/software/

myblackwrx

iTrader: (1)

Software is, the extra bits cost the £50 (my mistake)

Scott.T@PolarPerformance

ESL have the old daughter board which I believe they can support for £50 per remap, but it's up to you to change the map unless they have a suitable one on the shelf.
They are trying to move away from this to pedal the live mapping board which turns the standard ECU into a fully mappable item which can be bespoke mapped 'on-the-fly' time and time again.

gingerish

thanks for the info guys will look into the z4 n td05 then get a chip for z4,,, thamks guys am a novice on these subarus lol