AndyC_772

iTrader: (2)

They look like M5 x 20 with an unusually wide philips or posi head.

Sadly mine were rusted solid and I had to drill them out to get the covers off. Any ideas where I can get new ones?

500

They are M6 bolts, wont be more than a couple of quid from subaru if you want the O/E ones

AndyC_772

iTrader: (2)

Definitely M5 - it's a '96 car with the older design of fog covers.

Would Subaru dealers do them, given that they weren't fitted to any UK models? (At least, none that I can think of...)

jaytc2003

iTrader: (1)

just go b & q, i used new bolts from them (cant rmember the M) with washers when I fitted my fmic do the job, not a precision part so easy to fudge

RA95

B&Q do a baggy with some silver bolts and the washers to go behind them. Replaced mine recently as they were rusty. Can't remember if they are M5 or M6, I took the old bolt along and held it up to the bag in B&Q to make sure I bought the right size!!

Look nice when they are shiny - but I think they will need replacing each season to keep the fresh look.

AndyC_772

iTrader: (2)

Thanks guys - I've no doubt I can get a bolt that'll fit anywhere, I'd just prefer to have the original ones if poss. I'll give one or two scooby dealers a call, failing that it's B&Q as you suggest.