Advice/Suggestions/Offers Please
#1
Advice/Suggestions/Offers Please
I have a 1998 WRX Type R (non-STI, no active diff,waterspray,bodykit etc) With just under 58k miles on the clock.
It has recently had a Simtec ECU fitted by Steve Simpson Motorsport of Warton and was running 315 BHP and 310 Lb/Ft.Its fully decatted with H&S Jap style box. -30mm Springs. 4 pot calipers EBC Disks Red Stuff Pads,hed full service in April, Belts, Diff Oils etc. Currently on 18" Aerospeed RS-Gt wheels with Toyo Tyres but also have standard 16" gold wheels and P-Zeros.
I`m totally gutted after being told the big end bearings are on their way out!
What do i do?
I`m open to any offers for the car as it is, or any advice about repair/upgrade (2.5 conversion).
Just stuck with what to do at the moment really, wether to get rid, which i dont wanna do, or stand the cost of the repair?
Open to all ideas people!
Thanks, Lee.
It has recently had a Simtec ECU fitted by Steve Simpson Motorsport of Warton and was running 315 BHP and 310 Lb/Ft.Its fully decatted with H&S Jap style box. -30mm Springs. 4 pot calipers EBC Disks Red Stuff Pads,hed full service in April, Belts, Diff Oils etc. Currently on 18" Aerospeed RS-Gt wheels with Toyo Tyres but also have standard 16" gold wheels and P-Zeros.
I`m totally gutted after being told the big end bearings are on their way out!
What do i do?
I`m open to any offers for the car as it is, or any advice about repair/upgrade (2.5 conversion).
Just stuck with what to do at the moment really, wether to get rid, which i dont wanna do, or stand the cost of the repair?
Open to all ideas people!
Thanks, Lee.
Last edited by leeroyw; 16 October 2007 at 06:23 PM.
#6
i have been told by a couple of reliable garages that the bearings are worn and need replacing.
no this is not the car advertised on Ebay, i have owned it fo approx 2 and a half yrs now
thanks, lee.
no this is not the car advertised on Ebay, i have owned it fo approx 2 and a half yrs now
thanks, lee.