what boost is correct
16 October 2007 | 08:24 PM
#1
Thread Starter
Scooby Regular
Joined: Sep 2007
Posts: 184
Likes: 0
From: chesterfield
what boost is correct
my 1995 wrx import
hks filter, sti exhaust, running 256 bhp last rolling road at scooby clinic
only running about 0.8 boost though is this not the standard setting or is this about right for my set up?
scooby clinic set up for previous owner
oh and ive had restricter took off today
cheers rafa
hks filter, sti exhaust, running 256 bhp last rolling road at scooby clinic
only running about 0.8 boost though is this not the standard setting or is this about right for my set up?
scooby clinic set up for previous owner
oh and ive had restricter took off today
cheers rafa
16 October 2007 | 09:36 PM
#2
Scooby Regular
Joined: Apr 2007
Posts: 359
Likes: 0
From: East Sussex - www.polarperformance.co.uk
95WRX should be 0.875bar as standard (12.7psi)
With the restrictor in place.
If you remove the restrictor and have a decat chances are it will overboost/fuel-cut
With the restrictor in place.
If you remove the restrictor and have a decat chances are it will overboost/fuel-cut
17 October 2007 | 08:47 AM
#6
Thread Starter
Scooby Regular
Joined: Sep 2007
Posts: 184
Likes: 0
From: chesterfield
17 October 2007 | 05:09 PM
#7
Scooby Regular
iTrader: (1)
Joined: Jun 2007
Posts: 1,845
Likes: 0
From: throwing pieces oot a 20 storey flat
where is the restrictor?Mines running at 1.4 bar and has done since i got it,always thought that was high but nobody could find any problems with it.It runs rich and has eaten 2 02 sensors in the last year could this have been removed,i have no decat just centre and backbox
Thread
Thread Starter
Forum
Replies
Last Post