LOW BOOST
#1
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Bedfordshire
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi i took my car for rolling road the other day and was pushing 215.3bhp which is ok but boost is 0.5 bar peak was advised to get boost gauge to check this so i fitted 1 today and it came up with the same 0.5 bar peak also a few people have said that it maybe in limp mode but can it do 120mph in limp mode cos i did it today so dont think its that also gonna try cleaning boost solenoid tomorrow as been told could also be this, Any other user had this problem? maybe you could help me thanks madforcars321
#2
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi i took my car for rolling road the other day and was pushing 215.3bhp which is ok but boost is 0.5 bar peak was advised to get boost gauge to check this so i fitted 1 today and it came up with the same 0.5 bar peak also a few people have said that it maybe in limp mode but can it do 120mph in limp mode cos i did it today so dont think its that also gonna try cleaning boost solenoid tomorrow as been told could also be this, Any other user had this problem? maybe you could help me thanks madforcars321
check the e clip is still fitted to wastegate holding actuator secure,also check you have the restrictor in the pipe from turbo compressor housing to t piece by wastegate actuator.
also worth a check for boost leaks.
failing that try an ecu reset and see what happens
#3
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Bedfordshire
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
check the e clip is still fitted to wastegate holding actuator secure,also check you have the restrictor in the pipe from turbo compressor housing to t piece by wastegate actuator.
also worth a check for boost leaks.
failing that try an ecu reset and see what happens
also worth a check for boost leaks.
failing that try an ecu reset and see what happens
#4
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
![Ponder2](https://www.scoobynet.com/images/smilies/ponder2.gif)
if there is no restrictor fitted then you will only run 0.5-0.7 bar boost so i would say that is the cause of the probs.
try doing a search for restrictor there have been threads before about it that might give some info of where to get one
#5
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
have a look at this thread it gives info on restrictor size and the subaru part numbers
https://www.scoobynet.com/drivetrain...t-numbers.html
https://www.scoobynet.com/drivetrain...t-numbers.html
#6
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Bedfordshire
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
have a look at this thread it gives info on restrictor size and the subaru part numbers
https://www.scoobynet.com/drivetrain...t-numbers.html
https://www.scoobynet.com/drivetrain...t-numbers.html
![Thumb](https://www.scoobynet.com/images/smilies/thumb.gif)
Trending Topics
#8
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM