Maximum boost for TD04
#2
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
With an approriate remap, and supporting mods, a peak of 1.3 bar is not uncommon. It's only a little turbo, so cannot sustain it at high rpm though.
Be warned: if you just crank up the boost without appropriate fueling and ignition mapping, your engine will go long before the turbo will!
Ns04
Be warned: if you just crank up the boost without appropriate fueling and ignition mapping, your engine will go long before the turbo will!
Ns04
Last edited by New_scooby_04; 11 February 2008 at 07:15 PM.
#3
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
PS I noticed your other thread on oil. If you're going to modify the car, you'd be well advised to use a proper ester based fully synth oil like Silkolene Pro S.
Ask oilman on here for advice and a deal.
Ns04
Ask oilman on here for advice and a deal.
Ns04
#5
Scooby Regular
Thread Starter
Join Date: Jan 2008
Location: Bristol
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Thanku again for the heads up regarding oil also. Does anybody uprate oil pumps with basic-mid range mods or is that big power only? Just curious really. Im sorry i have like a million questions as im pretty new
#6
Scooby Regular
Join Date: Mar 2007
Location: The right side of 30psi
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
The 'uprated' oil pumps are just standard pumps with a modified pressure release valves, It was common for the release valve to fail after a long period of time. I would only change it if doing a rebuild. You could get an Oil pressure gauge to monitor the pressure this can normally indicate a faulty oil pump.
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM