scoob_wrx1

Any1 no some1 that can rebuild gear boxes as i have no gears at all,does any1 no wat i have blown with out looking at the gear box

kin quick

iTrader: (2)

There are a few companies that can rebuild them, but best bet is to get a stronger one as looking at your mods, you must be pushing a fair bit of torque and the UK newage box doesn't like that word!

I've got the same car as yours, roughly 290bhp and 300lb ft torque. When mine went I couldn't start the car unless the clutch was pushed down, didn't matter which gear I selected or even if it was in neutral it just wanted to move forwards but didn't actually move as something was locked solid.

Found out when the gearbox went, it took some teeth off the rear diff hence locking everything up and being low loaded home.

I chose to replace mine with a P1 box and diff, but the best bet is a 6-speed STi box if you can afford it. Either that or a straight replacement was approx £500-600 from a Scooby specialist which had been checked over, but then it could always go again!!

Give a few companies a call and find out whats best for you, I tried API, Zen and a few others for advice and they were all very helpfull.

Good luck

superscoobx

need more description, like how you arrived at having no gears! . lol

PeeVee

iTrader: (1)

As above really

Can you move the gear leaver in & out of gears??

Did you loose all the gears in one go or was it gradual??

If you can get her into gear, what happens when you lift the clutch pedal, is there any noise - does the car try and move??

scoob_wrx1

yes when u start the engine and put it in gear it sounded like the cogs in the box where loose,also took the box out of the car and a scooby specialist looked at it an sed i basically done 2nd and 3rd gear

SPIDERWRX

hi, what miles had the 5 speed box done?

so i can start saving for a ppg box

i am running same power as you,