Help: engine management light.........
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2008
Location: Newport, s.wales
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
My engine management light came on the other week had a computer read out says its misfired on 1 cylinder, ive renewed my plugs n leads on my impretza 02, but it avent solved the problem my light is still on any ideas. Please
Thanks in advance
Chris.
Thanks in advance
Chris.
#2
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
MY01 / 02 bugeyes have an ECU which can throw CELS for no apparant reason. I have had a few misfire CELS and also Camshaft position sensor errors...both usually occur at the top end of the rev range.
Dodgy neutral position switch can also give misfire CELS as well![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Did they clear the stored codes ??
Shaun
Dodgy neutral position switch can also give misfire CELS as well
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Did they clear the stored codes ??
Shaun
#3
Scooby Newbie
Thread Starter
Join Date: Jan 2008
Location: Newport, s.wales
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
hi there, thanks for replying to me, your saying to get another computer readout first, then go from there.
Im sorry for sounding thick but im no good with all the technicals bits lol i just luv to drive my scooby, i gets cheesed off when something comes up.
Thanks
Christine
Im sorry for sounding thick but im no good with all the technicals bits lol i just luv to drive my scooby, i gets cheesed off when something comes up.
Thanks
Christine
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM