I've got an intercooler spray system from a newage STI.

I've got the interior switch, the bottle, nossle, pump etc, but I haven't got the wiring loom (I guess this is part of the car's wiring loom), so I need to make one up.

Any idea where I can source the connectors that plug into the switch and also to the spray? I could just splice the cables, but I don't really want to cut them up as it looks untidy.

 

The spray loom is only on the STi, so you'll have to make your own up.
I used 3 core lead rather than have three long strands of cable.
Just follow the STi wiring diagram available on the web.
You'll also need a timer relay as the switch won't take the current load from the pump.
The STi has a red light on the dash to show a low tank water level. I spliced a large red light and insatlled it by the handbrake.

Not sure what you are trying to splice the switch into? Do you have the connector going into the switch?

nick

 

Good idea about the 3-core lead, i'll see if i can find some in maplins maybe...

I don't have the connector going into the switch, no (both pump end and "cabin" end)