How do I get 300bhp, plus?
#1
How do I get 300bhp, plus?
Hi
Can anyone tell me the best way to get 300bhp or more. I've got a 98 'S' Uk Turbo 2000 with a full Blitz NUR Spec exhaust, boost controller and Walbro 255 fuel pump. I have about 1000 - 1250 ish to spend.
The previous owner reckoned it was running at 253bhp ish.
Cheers
Mark
Can anyone tell me the best way to get 300bhp or more. I've got a 98 'S' Uk Turbo 2000 with a full Blitz NUR Spec exhaust, boost controller and Walbro 255 fuel pump. I have about 1000 - 1250 ish to spend.
The previous owner reckoned it was running at 253bhp ish.
Cheers
Mark
#3
Scooby Regular
iTrader: (4)
Join Date: May 2003
Location: Doncaster, UK
Posts: 2,567
Likes: 0
Received 0 Likes
on
0 Posts
Pretty sure that yes you can map the ecu, i would be very suprised if you couldnt on a 98 reg
Anyway to start with the TD04 turbo wont get past 280 bhp so you gonna have to change that.
If your not wanting to go much over 320bhp then I would suggest
Decat Downpipe £100 second hand off here
Green panel filter, NOT an induction kit!
VF28 turbo (Dont go for a TD05 as it will be too laggy at 300bhp) £250-300 second hand off here
Tek 3 remap about £650 i think
That should see you at 300 bhp
Anyway to start with the TD04 turbo wont get past 280 bhp so you gonna have to change that.
If your not wanting to go much over 320bhp then I would suggest
Decat Downpipe £100 second hand off here
Green panel filter, NOT an induction kit!
VF28 turbo (Dont go for a TD05 as it will be too laggy at 300bhp) £250-300 second hand off here
Tek 3 remap about £650 i think
That should see you at 300 bhp
#4
Trending Topics
#10
Scooby Regular
Join Date: Apr 2007
Location: cheltenham
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
i have a 98 s reg turbo couldn't be mapped.
went for the apexi powerfc.
take a look at my mods on view my scooby running approx 320-330bhp
take a look here for mapping & supplying + prices : www.jollygreenmonster.co.uk
will travel anywhere
very well known mapper on this site & a very good mapper,mapped mine twice now with excellent results
went for the apexi powerfc.
take a look at my mods on view my scooby running approx 320-330bhp
take a look here for mapping & supplying + prices : www.jollygreenmonster.co.uk
will travel anywhere
very well known mapper on this site & a very good mapper,mapped mine twice now with excellent results
#12
Those ECU's can be mapped now, by the ESL live board, or another I thnk from power engineering and / or Scoobyclinic. About £550 though. Apexi and map for £750 ish the better way to go.
Decat d/pipe wide mouth, STi panel filter, turbo and ECU/Map.
AndyF TD04 hybrid good for around 320 bhp and great spool up.
See andyforrestperformance.co.uk. Under turbos.
Alyn at ASPerformance will help you out too, great guy.
Decat d/pipe wide mouth, STi panel filter, turbo and ECU/Map.
AndyF TD04 hybrid good for around 320 bhp and great spool up.
See andyforrestperformance.co.uk. Under turbos.
Alyn at ASPerformance will help you out too, great guy.
Thread
Thread Starter
Forum
Replies
Last Post