Engine Block
09 June 2008, 03:31 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2008
Location: Herts
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Engine Block
Need a bit of info guys.
A friend of mine has a MY99 uk2000 turbo which apparently requires a new block for the engine.
What we'd like to know is wot other models of imprezas can we use a block from that we could fit his head onto without any mods or problems?
A friend of mine has a MY99 uk2000 turbo which apparently requires a new block for the engine.
What we'd like to know is wot other models of imprezas can we use a block from that we could fit his head onto without any mods or problems?
09 June 2008, 07:08 PM
#2
Any Version 5,6,7 block will do - the later EJ207 blocks are twin breather but all you normally do is to blank the center breather off.
Unless your original block is damaged/badly overheated,then a rebore with oversize pistons and rings is the normal route to go down.
Might be worth contacting David @ API Engines for some friendly advise on what to do.
Mick
Unless your original block is damaged/badly overheated,then a rebore with oversize pistons and rings is the normal route to go down.
Might be worth contacting David @ API Engines for some friendly advise on what to do.
Mick
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM