Notices
General Technical
Sponsored by:
Sponsored by: CARiD

2001 wrx turbo

Thread Tools
 
Search this Thread
 
Old 12 June 2008 | 12:32 AM
  #1  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default 2001 wrx turbo

hi i hav a subaru impreza 2001 wrx with pro drive pack..i hav just found out my forge dump valve is sticking and ther is a problem with 1 of the springs..wud this cause my car to run a little flat nd run rich..its not ticking over properly it kangaroos slightly nearly everytime i pull away..cud this cause this..i hav just bought a bailys dump valve and it will be fitted on friday will i feel the difrence...also wot is remapping and how much does it cost..any help wud be greatful ..the dump valve cost me £139 with the delivary
Old 12 June 2008 | 01:12 AM
  #2  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default

also can any 1 tell exactly wot a pro drive performance pack is...i hardly no anything about subaru imprezas
Old 12 June 2008 | 01:46 AM
  #3  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default

can any 1 help me please any help would be appreciated thanks
Old 12 June 2008 | 02:17 AM
  #4  
cookstar's Avatar
cookstar
Scooby Regular
iTrader: (6)
 
Joined: Apr 2005
Posts: 33,828
Likes: 0
From: Stroke it baby!
Default

I can tell you that if you go to the Forge website, they sell spring kits for these, I bought one for mine it was around £20.

Hope this helps.
Old 12 June 2008 | 05:06 PM
  #5  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default

cud any 1 else help me please..thanks
Old 12 June 2008 | 07:10 PM
  #6  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default

please please..any 1 hav any ideas if i change my leaking sticking dump valve will it stop kangarooing wen i pull away and rev up n down wen its ticking over..my engine managment light came on and its come back as code p0172 = running rich its not the maf sensor..cud the dump valve be causen this
Old 12 June 2008 | 07:53 PM
  #7  
JamWRX1's Avatar
JamWRX1
Scooby Regular
 
Joined: Dec 2007
Posts: 225
Likes: 0
From: North Wales
Default

dont know about your dump valve problem mate soz but can help u with what the prodrive power pack is,you get a center decat a prodrive back box diffrent ecu silicon hose to your intercooler that says prodrive on it and about 240bhp from that .got one on mine but theres not much left on changed alot of thing.
Old 12 June 2008 | 08:17 PM
  #8  
Myles's Avatar
Myles
Scooby Regular
iTrader: (40)
 
Joined: Sep 2007
Posts: 6,106
Likes: 1
From: Marlow, Bucks.
Default

When I owned a Leon Cupra, I got Forge to send me a servicing kit for FREE!! As far as I remember, they have servicing diagrams on their website.
Old 13 June 2008 | 02:08 AM
  #9  
jame5evan5's Avatar
jame5evan5
Thread Starter
Scooby Regular
 
Joined: May 2008
Posts: 64
Likes: 0
Default

cud the dump valve cause the car to hav a flat spot rite at the top of the accelerator..wen i pull away it kangaroos a little ..the subaru garage put it on the computer and told me i had to change the dump valve as it was sticking and the springs or sumthn had problems.. i will be putting my new bailys dump valve on later today..will this help the car tick over better or run smoother
Old 13 June 2008 | 02:45 AM
  #10  
cookstar's Avatar
cookstar
Scooby Regular
iTrader: (6)
 
Joined: Apr 2005
Posts: 33,828
Likes: 0
From: Stroke it baby!
Default

If you have been told the dump valve is not working properly, then you have your answer.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 04:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 09:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 07:12 AM




All times are GMT +1. The time now is 01:15 AM.