sparky300

I am desperately seeking the parts show in the picture below as the pipe was blowing. I have no idea what part numbers they are as my local dealer was closed today.

Does any one know the costs or if a shop on here sells the bits below.

i need a replacement for a WRX Import 1993 (MY93)
thanks

sparky300

anyone?

pinchers

iTrader: (1)

Stainless steel exhausts manifolds and headers from Hayward and Scott

eBay.co.uk Shop - impreza: Subaru: wrx, sti, version 8

it would be cheaper for you to by an after market unit rather than a subaru one,

the top link is good quality stuff and i have bought from them, there was a group buy on here not long ago.

the second one is the cheaper option, i have bought from them too, the stuff is good for the cost,

what u have in the picture is the 'UP PIPE' the goes from the manifold to the turbo,

on both sites just look for the up pipe for a classic

got my up pipe from H&S it was goooood quality

hope this helps

sparky300

thanks pinchers. i was also thinking go for a after market unit. i looked up on a manual and looks like its a 'front joint pipe' i assumed it was the 'turbo join pipe' but that part does not look the same in the manual as the bits in my picture

sparky300

anyone used this shop: Subaru Parts at Graham Goode Racing

the 3 products look like what i need, anyone known which is right for my model

PS i have emailed H&S as i could not see on the site the bit i needed

exvaux

iTrader: (1)

yeah i used GGR for filters and gasket set for mine

sparky300

GGR does not seem to have a slip joint to allow for heat expansion. HS does seems the better of the two but looks like it does not come with all the fittings like the GGR one. i take it the heat expansion is important, so i wonder why the GGR ones does not have it?

HS ONE:
Stainless exhausts manifolds headers

GGR ONE:
Subaru Parts at Graham Goode Racing

sparky300

i ended up ordering from HS this one for my 1993 wrx import: Stainless exhausts manifolds headers

Delivery was fast, however the part fitted badly (a little short), and the holes needed to be made bigger from 10mm to 13mm. after some playing around my garage did get it to fit. Build quality was good.

PS £3.80 for a nut from the main dealer!!!! for 2 gaskets, a few blots and nuts it cost £80 altogether, how can they justify that lol, never mind just happy to have my car back.

harvey

iTrader: (48)

I wish I had seen this and saved you some money. O/E up-pipe with VGC heat shields for £25 plus postage and several other up-pipes for differing power levels.

Various second hand uppipes. O/E and aftermarket.
Take your pick :
http://i38.tinypic.com/20g0bcj.jpg
http://i34.tinypic.com/vndd.jpg

Fizz

iTrader: (1)

small collection there Harvey....

harvey

iTrader: (48)

Yeah. The conditions in my garage seems to favour breeding like rabbits.