TimH

iTrader: (11)

Have determined that the intermittent flashing CEL light is "P0245 Wastegate control solenoid valve circuit low input".

OK, great. Now, what does that mean . What do I need to check, fix, or replace?

I also have an occasional "P0335 Crankshaft position sensor circuit malfunction". I know when this is faulty as the car won't start until I rock it slightly in gear - happens once every month or 2. Obviously the sensor has not completely died, but I guess I ought to replace it - or can it be cleaned maybe? What happens if it fails completely while driving - will it be an RAC job?

merlin24

iTrader: (1)

Crank Sensor failure will leave you stranded but its worth removing it and cleaning any oil/belt residue fron the sensor.

P0245 Fault Chart :





P0335 Fault Chart :





Mick

TimH

iTrader: (11)

Cheers mate - just what I need!

My suspicion is poor contacts - the original 2 port's been replaced with a 3 port and initial suspicions are the connectors used to connect it.

merlin24

iTrader: (1)

No worries - give you something to do on a Wet Sunday !!

Mick