Blanking plug when fitting forge dump valve
#1
Scooby Regular
Thread Starter
Join Date: Dec 2006
Location: England somewhere
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
one of my mates has given me a nearly new forge dump valve but he said I will need to get a blanking plug so that when i take the factory fit one off my 05 wrx there is a pipe which needs to be blanked off...any ideas where i can get a plug from thanks
#2
Scooby Regular
iTrader: (13)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
blanking plug, Cars, Parts Vehicles, Business, Office Industrial, Baby items at low prices on eBay.co.uk
You'll have to measure the internal diameter of the hole of the recirc. port on the induction pipe, then get one about 1mm bigger than that measurement for a good, tight fit. Should you need to, then you can easily warm the recirc. pipe up by quickly immersing it in boiling water then quickly fitting the plug.
You'll have to measure the internal diameter of the hole of the recirc. port on the induction pipe, then get one about 1mm bigger than that measurement for a good, tight fit. Should you need to, then you can easily warm the recirc. pipe up by quickly immersing it in boiling water then quickly fitting the plug.
#4
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
yeah forge are really good, i snapped the vaccume nipple of my forge dv and i emailed them and they got back to me and send me a replacment for free. was very surprised.
info@forgemotorsport.co.uk
but if not ebay is your friend, its a 34mm plug you need for your 05 wrx, same as mine
info@forgemotorsport.co.uk
but if not ebay is your friend, its a 34mm plug you need for your 05 wrx, same as mine
![Thumb](https://www.scoobynet.com/images/smilies/thumb.gif)
Last edited by Nolan_WRX; 24 October 2008 at 07:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM