Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Knock Sensor

Thread Tools
 
Search this Thread
 
Old 16 January 2009 | 08:56 PM
  #1  
John Laverick's Avatar
John Laverick
Thread Starter
Scooby Regular
 
Joined: Sep 2002
Posts: 37
Likes: 0
Default Knock Sensor

I have had an intermittent CEL coming up on my Version 5 Type R. It comes on cold or hot but usually on the overrun ... when I get back on the throttle it usually goes off.

Anyway I've done a manual fault code read which gave 22 [knock sensor] ... I’ve reset and it came back again.

I'm assuming the next step is to replace?

Where’s the best place to source one and how much am I looking at? My local Subaru Dealers [Tiley Bristol] quoted £70 for a standard UK turbo replacement but couldn't confirm if it is the correct one for my car.

Are all the knock sensors for the classic model the same?
Old 16 January 2009 | 09:22 PM
  #2  
George_goring0913's Avatar
George_goring0913
Scooby Regular
 
Joined: Nov 2008
Posts: 54
Likes: 0
Default

Try E-bay, think they are about £50 new.
I swoped my sti 3 knock sensor with a sti 2 one to eliminate it from a fault i was having a wile back and its exactly the same, cant see them changing to much.
someone will give you a def answer very soon on here i think.
Good luck.
Old 16 January 2009 | 09:44 PM
  #3  
FB Tuning's Avatar
FB Tuning
Former Sponsor
iTrader: (30)
 
Joined: Jan 2005
Posts: 4,219
Likes: 0
From: FB Tuning Workshop - HP27
Default

V5/6 is a different sensor, and has a different plug to V1-4
Old 16 January 2009 | 10:39 PM
  #4  
joey_turbo's Avatar
joey_turbo
Scooby Regular
iTrader: (26)
 
Joined: Apr 2006
Posts: 6,547
Likes: 9
From: Essex
Default

Its worth re-setting the ECU before you change it. I had knock sensor code after changing fuel pump. Ordered it from subaru, but reset my ECU first, and the faults not come back after 6 months or so.
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / ECU Reset
Old 16 January 2009 | 11:40 PM
  #5  
John Laverick's Avatar
John Laverick
Thread Starter
Scooby Regular
 
Joined: Sep 2002
Posts: 37
Likes: 0
Default

I've already done an ECU reset ... the code came back after 5 minutes.

Sounds like the V5 is a different sensor/plug?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
29 December 2015 12:07 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
thunder8
General Technical
0
01 October 2015 10:13 PM
WrxSti03
Drivetrain
0
30 September 2015 11:24 PM



Quick Reply: Knock Sensor



All times are GMT +1. The time now is 07:06 PM.