screamer pipe
It's really really fecking noisy on accel. I need to sort an exhaust out where it dumps to the exhaust instead of atmosphere 
26 January 2009, 01:47 PM
#4
Scooby Regular
iTrader: (15)
Join Date: Jul 2001
Location: Portsmouth
Posts: 8,606
Likes: 0
Received 0 Likes
on
0 Posts
erm, from my understanding the screamer pipe is to dump from the external wastegate, the only real options are vent to atmosphere or recirc to the downpipe and out through the normal exhaust route.
So you need one for an external gate regardless, question is do you VTA or chuck it back into the DP.
OP is slightly confusing and a few people might think its an option on a normal turbo'd scoob.
Just clarifying for the masses
So you need one for an external gate regardless, question is do you VTA or chuck it back into the DP.
OP is slightly confusing and a few people might think its an option on a normal turbo'd scoob.
Just clarifying for the masses
05 February 2009, 03:54 PM
#7
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
im sure you can use an external wastegate with any turbo as long as the old internal wastegate is blocked off well enough, my setup is far from standard, for one the turbo is under the engine now (look in projects at RS200 IMPREZA) and was easy to fit the external wastegate with screamer, your setup is a lot harder to fit a screamer pipe to, as there isnt a lot of room at the back, but if your good with a welder then give it a go, if not then you can buy the setup but it costs, heres a pic of mine.
my screamer comes off to the right of the wastegate now.
phil.
my screamer comes off to the right of the wastegate now.
phil.
Trending Topics
05 February 2009, 04:23 PM
#8
Scooby Regular
iTrader: (6)
Join Date: Oct 2008
Location: Nottingham
Posts: 1,264
Likes: 0
Received 0 Likes
on
0 Posts
im sure you can use an external wastegate with any turbo as long as the old internal wastegate is blocked off well enough, my setup is far from standard, for one the turbo is under the engine now (look in projects at RS200 IMPREZA) and was easy to fit the external wastegate with screamer, your setup is a lot harder to fit a screamer pipe to, as there isnt a lot of room at the back, but if your good with a welder then give it a go, if not then you can buy the setup but it costs, heres a pic of mine.
my screamer comes off to the right of the wastegate now.
phil.
my screamer comes off to the right of the wastegate now.
phil.
Now that looks divine pal.
Who did that masterpiece?
What spec level is it,if you dont mind me asking?
05 February 2009, 06:08 PM
#9
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
thankyou, thankyou, i did it all myself, its not quite done yet but its not far off now, just a few little probs, it will need mapping in a few weeks so not sure of what bhp its running, look in VIEW MY SCOOBY for the spec.
phil.
phil.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
