Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Subaru Coolant

Thread Tools
 
Search this Thread
 
Old 01 March 2009 | 11:59 PM
  #1  
CatalunyaSimon's Avatar
CatalunyaSimon
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 73
Likes: 0
From: Berkshire
Arrow Subaru Coolant

Want to do a coolant change and I believe it must be Subaru's own coolant product from a dealer. What do the Impreza specialist service centers use in this case.

Found this information on a Legacy site.

Subaru specifies a non-silicate, non-phosphate and non-amine antifreeze. They also refuse to tell anyone which brands meet their specifications.

By law, Subaru cannot mandate Subaru coolant unless they provided it for free.

I spoke with a chemical engineer at the company that manufactrurers Peak Coolant last week for 40 minutes. Here's what I found out:

Peak Global is 100% phosphate and silicate free.

Virtually ALL coolants manufactured for the past few DECADES are non-amine. Therefore, nobody lists non-amine on their coolant bottles.

The ingredients in Subaru and Peak Global are identical except for minor differences in the anti-corrosion package.

The company that makes the anti-corrosion package for Subaru coolant also supplies Peak. That company has told Peak Subaru's anti-corrosion package is 100% compatible with Peak's. they are virtually interchangable.

In a brilliant marketing move, Subaru has managed to skirt the Magnusson Moss Act but telling us to only use a "non-amine" coolant. Since nobody's made a non-amine coolant for years, we're running around looking for coolant that doesn't have something that isn't around anymore.

It's like your doctor telling you it's OK to drink cola, but make sure the label says cocaine-free. How long has it been since Coca-Cola's ingredients included cocaine?

By the way, the guys at Peak are very familiar with Subaru, Subaru coolant and Subaru coolant additive.

As far as I'm concerned, Peak Global Coolant is the equivalent of Subaru coolant.

So can I use a non genuine Subaru Coolant and what is recommended?

Last edited by CatalunyaSimon; 02 March 2009 at 12:31 AM.
Old 03 March 2009 | 10:12 PM
  #2  
AshMurc's Avatar
AshMurc
Scooby Regular
 
Joined: Apr 2008
Posts: 397
Likes: 0
Default

bttt

i need to know this too-- and admittedly i haven't actually looked yet, but where do you drain the coolant system from?

Ash
Old 03 March 2009 | 10:17 PM
  #3  
CatalunyaSimon's Avatar
CatalunyaSimon
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 73
Likes: 0
From: Berkshire
Default

Not got to that stage yet. Just want to know about the recommended coolant. Let me know how you get on and post a link to any good threads on draining. I have some info on filling that I can post if you like.
Old 04 March 2009 | 01:05 AM
  #4  
joz8968's Avatar
joz8968
Scooby Regular
iTrader: (13)
 
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
Default

Originally Posted by AshMurc
...where do you drain the coolant system from?...
Dsconnect bottom hose AFAIK.
Old 04 March 2009 | 02:01 AM
  #5  
Glowplug's Avatar
Glowplug
Scooby Regular
iTrader: (8)
 
Joined: Jan 2008
Posts: 5,027
Likes: 1
From: On The Road!
Default

Originally Posted by joz8968
Dsconnect bottom hose AFAIK.
Thats how i did mine

But what i wasn't aware of was the specifics of what to replace with I had access to a drum of Mercedes Benz coolant and used that, thats about 8 months ago now, should i be concerned??
Old 04 March 2009 | 08:14 AM
  #6  
Modifications's Avatar
Modifications
Scooby Regular
iTrader: (6)
 
Joined: Apr 2007
Posts: 1,008
Likes: 0
From: Sheffield
Default

yea i would like to know too im looking to get Motul INUGEL OPTIMAL coolant ready mixed

info below

Motul INUGEL OPTIMAL Ready to use cooling liquid Anti-corrosion and anti freeze
Old 04 March 2009 | 09:25 AM
  #8  
joz8968's Avatar
joz8968
Scooby Regular
iTrader: (13)
 
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
Default

Originally Posted by b13bat
Thats how i did mine

But what i wasn't aware of was the specifics of what to replace with I had access to a drum of Mercedes Benz coolant and used that, thats about 8 months ago now, should i be concerned??
If it was a modern-day Ethylene Glycol coolant-antifreeze (which it's bound to be), then you'll be fine.
Old 04 March 2009 | 10:11 AM
  #9  
Glowplug's Avatar
Glowplug
Scooby Regular
iTrader: (8)
 
Joined: Jan 2008
Posts: 5,027
Likes: 1
From: On The Road!
Default

Originally Posted by joz8968
If it was a modern-day Ethylene Glycol coolant-antifreeze (which it's bound to be), then you'll be fine.
Cheers Joz8968
Old 07 March 2009 | 01:30 AM
  #10  
CatalunyaSimon's Avatar
CatalunyaSimon
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 73
Likes: 0
From: Berkshire
Default

When adding, replacing or servicing the cooling system always use Genuine Subaru Long Life Coolant.

Genuine Subaru Long Life Coolant is a phosphate (non-amine) type and is specially formulated for all Subaru vehicles equipped with aluminum engines and radiators. Coolant of other types may not provide the proper protection to aid against corrosion of aluminum parts.

If an equivalent must be used, make sure it is a phosphate (non-amine) type. As a reminder, use of Genuine Subaru Long Life Coolant is mandatory on all repairs paid for by Subaru, Inc. that require the replenishment of coolant. This holds true for any claim type.

Do not use flushing machines.
If a flushing machine has been used to service other brand vehicles with copper radiators, a chemical reaction between copper ions and Subaru coolant may occur. This could also cause clogging of the radiator.

If regular flushing is required, only use fresh tap water. Do not use hard water. Hard water will create calcium build up which will clog the radiator.

Whenever the coolant is changed, you must add Genuine Subaru Cooling System Conditioner. Genuine Subaru Cooling System Conditioner has been tested and approved for aluminum engines and radiators.

Do not use after-market coolant reinforcement agents, sealers and/or flushing agents as those chemicals could corrode aluminum parts.

Must be an aftermaket product everyone can agree on being used.
Old 07 March 2009 | 06:26 PM
  #11  
Modifications's Avatar
Modifications
Scooby Regular
iTrader: (6)
 
Joined: Apr 2007
Posts: 1,008
Likes: 0
From: Sheffield
Default

Motul INUGEL OPTIMAL Ready to use cooling liquid Anti-corrosion and anti freeze

so this is no good then?
Old 07 March 2009 | 06:36 PM
  #12  
jameswrx's Avatar
jameswrx
Scooby Regular
iTrader: (4)
 
Joined: Sep 2002
Posts: 6,535
Likes: 41
From: Kent
Default

I was told I need 'green' coolant by euro car parts.. but they didn't stock it, I did find some at another motorfactors but it's not the same as the green coolant in my wagon.. the stuff in my wagon almost glows fluorescent! It feels slippery too. This new stuff I bought for my type r just looks plain forrest green colour.
Old 07 March 2009 | 06:41 PM
  #13  
CatalunyaSimon's Avatar
CatalunyaSimon
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 73
Likes: 0
From: Berkshire
Default

I think your reffering to Comma Xstream Green Extralife Concentrated Antifreeze. I have seen a few users running with this. But is it recommended

Last edited by CatalunyaSimon; 07 March 2009 at 06:42 PM.
Old 07 March 2009 | 06:51 PM
  #14  
scoobyboy's Avatar
scoobyboy
Scooby Regular
 
Joined: Nov 2001
Posts: 3,409
Likes: 0
From: uk
Default

only about 08 cars onwards need longlife coolant
Old 07 March 2009 | 07:10 PM
  #15  
CatalunyaSimon's Avatar
CatalunyaSimon
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 73
Likes: 0
From: Berkshire
Default

Ok, but why.
Old 07 March 2009 | 08:19 PM
  #16  
ALi-B's Avatar
ALi-B
Moderator
iTrader: (1)
 
Joined: Apr 2002
Posts: 38,047
Likes: 301
From: The hell where youth and laughter go
Default

You cannot rely on coolant colour to ascertain what type it is. Because the colour is a dye, and whilst there is a tendency for some to signify what type, manufacturers still use whatever colour takes there fancy with no regard of what spec their coolant is.

One also has to be a little careful with info about antifreeze floating about as some is based on products that are only available in America (even under the same brand, they can differ). As they tend to use different additives in their conventional coolants to what we have in Europe.

AFAIK, there are three types of coolant available in the UK:

OATS (organic acid technology): Basically, lifetime coolant: do not use this in a car not designed for it (read the manual ).

Glycol based coolants; basically conventional coolant. Likewise, do not use this in a car designed for OAT coolant. Glycol based coolants also split further, based on their silicate and phosphate levels. But generally speaking what we have on the shelf in the UK is low silicate and no phosphates and therefore is compatible with most Japanese and European cars.

Finally hybrid coolants, basically long-life coolant. Glycol based but with some organic acids. Again, do not mix with the other types. These are long-life coolants (note long-life, NOT lifetime). Difference here is they last between 5 to 10 years as opposed to the 3 to 5 years for a conventional glycol coolant.



To confuse matters further; Subaru doesn't use one type of coolant: Early cars used conventional glycol, whilst I believe later cars use Hybrid. Now I might be wrong, but I think the latest MY08/09 hatchback Impreza uses OAT.

I could be wrong, so the best thing to so is read the manual! It is your most accurate source of information.

Take note of the reccomended change intervals; lifetime won't specify a change interval. Long-life will be somewhere around five to tens years and conventional will be typically three years.

Its best to stick with what was put in from the factory, as thats what it was designed to be compatible with. If in doubt with whats already in the car, fully drain and flush the cooling system (including engine block, cylinder heads and heater matrix) with a hosepipe until the water runs out crystal clear. Then refill using the corrent mix (50:50, unless pre-diluted).
Old 15 March 2009 | 08:29 PM
  #17  
RB5#219's Avatar
RB5#219
Scooby Regular
 
Joined: Dec 2007
Posts: 51
Likes: 0
From: rotherham,southyorkshire
Default

can you buy the coolant from subaru?
Old 09 April 2009 | 10:48 PM
  #18  
mebz's Avatar
mebz
Scooby Regular
 
Joined: Apr 2009
Posts: 32
Likes: 0
Default

I went and got some coolant from my local Subaru centre. They also gave me shell radiator fluid. They said it's what they get supplied with by Subaru.

Contains: Ethanediol
Contains: Bittering agent

Does not contain nitrates, amines and phospates
Old 19 November 2009 | 10:03 PM
  #19  
scoobyc's Avatar
scoobyc
Scooby Regular
iTrader: (2)
 
Joined: Nov 2008
Posts: 2,770
Likes: 2
From: Berkshire
Default

Anything available from halfords or local motofactor suitable for 98 STI do we know?
Old 19 November 2009 | 10:16 PM
  #20  
Splitpin's Avatar
Splitpin
Scooby Regular
 
Joined: Jan 2006
Posts: 3,695
Likes: 0
Default

Mobil Advanced Antifreeze is excellent.

And pink.
Old 19 November 2009 | 11:23 PM
  #21  
scoobyc's Avatar
scoobyc
Scooby Regular
iTrader: (2)
 
Joined: Nov 2008
Posts: 2,770
Likes: 2
From: Berkshire
Default

So basically any modern antifreeze which isnt OAP is suitable for my car?
Old 20 November 2009 | 12:02 AM
  #22  
Splitpin's Avatar
Splitpin
Scooby Regular
 
Joined: Jan 2006
Posts: 3,695
Likes: 0
Default

Originally Posted by scoobyc
So basically any modern antifreeze which isnt OAP is suitable for my car?
Mobil Advanced is OAT. I've used it in my own car since I built my current engine 3.5 years ago. I stripped it over the summer to change some parts and the wet sections, once the dried coolant residue was wiped off, looked brand spanking new. Needless to say I put more of the same back in.

If someone can come up with a considered, solid reason not to use an OAT-based coolant in an EJ, I'd be interested to read it.
Old 22 November 2009 | 11:32 AM
  #23  
scoobyc's Avatar
scoobyc
Scooby Regular
iTrader: (2)
 
Joined: Nov 2008
Posts: 2,770
Likes: 2
From: Berkshire
Default

Ahh i just went for some normal stuff in the end. internet is full of ****. the more i read the more i was confused!
The following users liked this post:
Old 09 June 2014 | 04:55 PM
  #24  
eddie_impreza's Avatar
eddie_impreza
Scooby Newbie
 
Joined: Jan 2014
Posts: 23
Likes: 1
From: bracknell
Default

So after a bit of a search and reading all above it seems green coolant is what I need for my classic Turbo (indeed its what's in there at present). Subaru obviously recommend their own stuff but I don't really want to have to go all the way to Subaru specially to be fleeced for overpriced coolant. Trouble is ECP only do cheapo blue stuff, as does Unipart and I've totally given up on GSF in recent years. Anyone bought any recently that's good for the subaru?
Old 09 June 2014 | 05:00 PM
  #25  
fpan's Avatar
fpan
Scooby Regular
iTrader: (11)
 
Joined: Jan 2007
Posts: 3,429
Likes: 176
From: UK
Default

It's not the colour that determines the composition of the coolant.
Usually, red/pink are organic ones and blue/green are ethylenglycol ones but read the label.
Don't mix the two.
Old 09 June 2014 | 06:24 PM
  #26  
eddie_impreza's Avatar
eddie_impreza
Scooby Newbie
 
Joined: Jan 2014
Posts: 23
Likes: 1
From: bracknell
Default

I'm more wondering where to get it?
Old 10 June 2014 | 09:04 AM
  #27  
DJB3's Avatar
DJB3
Scooby Regular
 
Joined: Apr 2003
Posts: 111
Likes: 0
Default

Subaru coolant conditioner = Holts Radweld
Old 11 June 2014 | 10:53 AM
  #28  
eddie_impreza's Avatar
eddie_impreza
Scooby Newbie
 
Joined: Jan 2014
Posts: 23
Likes: 1
From: bracknell
Default

Righty, I've done more research. ECP swears you cant get the 'green' stuff any more (make of it what you will). The garage where my cars been serviced most its life says he gets it from his local independent factors (120 miles away so no good for me). I've gone through everything my local motor factors had and read all the labels on all the Comma G30/40/48, the Halfords stuff, etc etc and its all either OAT or a mix or Silicate based. The only one I could find that met the strict Subaru criteria was (as mentioned above) Shell Radiator Fluid. It is free from Nitrites, Amines or Phosphates (NAP-free). Its a Bluey green colour and £21 for 4 litres. And conveniently available everywhere there's a shell garage Hope this helps the next person struggling to find this elusive coolant
The following users liked this post:
Old 15 June 2014 | 01:36 AM
  #29  
chrisvarns's Avatar
chrisvarns
Scooby Newbie
 
Joined: Oct 2013
Posts: 24
Likes: 0
From: Cambridge, UK
Default

But isn't that silicate based as well?

EDIT: It's not.

Last edited by chrisvarns; 18 June 2014 at 12:28 AM.
Old 04 December 2015 | 07:14 PM
  #30  
riiidaa's Avatar
riiidaa
Scooby Regular
iTrader: (2)
 
Joined: Jul 2004
Posts: 3,349
Likes: 0
From: Near Croydon
Default

More confusion anyone?

OAT not recommended for 1997> gc8 then?


Quick Reply: Subaru Coolant



All times are GMT +1. The time now is 08:28 PM.