Help - MY99 GC8 UK Turbo generated a misfire
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: Lancashire : MY99 UK Turbo
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Car hasn't really been used in the last year due to getting a new job with long commute but it needed a new clutch so last month i fitted a new clutch.
After fitting the clutch the car seems to have generated a misfire on boost, The AFR goes **** and the boost gauge splutters.
I have replaced the intercooler Y boost pipe as i knew that it had a slight crack in it under jubilee clip on the join to the turbo and also i replaced the boost control solenoid vacuum pipe as that was also splitting at the join to the actuator t-piece.
Air flow sensor was replaced about a month before i stopped using the car so i am hoping that hasn't gone while its bin sitting around.
I have done an ECU reset after the above as well and the misfire is still there.
Does anyone have any ideas of where to explore next?
Car worked spot on before i changed the clutch i have checked everything and i am 99.9% I've not missed a wire connection of vacuum connection.
Any help would be really appreciated otherwise i am going to have to take it into a specialist.
Thanks
Craig
After fitting the clutch the car seems to have generated a misfire on boost, The AFR goes **** and the boost gauge splutters.
I have replaced the intercooler Y boost pipe as i knew that it had a slight crack in it under jubilee clip on the join to the turbo and also i replaced the boost control solenoid vacuum pipe as that was also splitting at the join to the actuator t-piece.
Air flow sensor was replaced about a month before i stopped using the car so i am hoping that hasn't gone while its bin sitting around.
I have done an ECU reset after the above as well and the misfire is still there.
Does anyone have any ideas of where to explore next?
Car worked spot on before i changed the clutch i have checked everything and i am 99.9% I've not missed a wire connection of vacuum connection.
Any help would be really appreciated otherwise i am going to have to take it into a specialist.
Thanks
Craig
Last edited by Heple; 20 March 2009 at 03:11 PM.
#3
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: Lancashire : MY99 UK Turbo
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
No not really, splutters sometimes off boost and idle sometimes dips. i've checked the boost hoses they're 100% ok. The vacuum hoses i'm 99% sure are ok?
Could a dodgy Lambda cause it?
Could a dodgy Lambda cause it?
Last edited by Heple; 20 March 2009 at 06:19 PM.
#4
Scooby Regular
iTrader: (3)
Join Date: Apr 2005
Location: south wales
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
had same trouble on mine 00 classic..thought i was the maf, but turned out to be the lamba...try here for one..Just Lambda, Suppliers of Bosch and NTK lambda sensors including zirconia and titania sensors by post got good deal off these people..
hope this helps
cheers scoobymike
hope this helps
cheers scoobymike
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post