WIPER BLADES / ARMS
31 March 2009, 03:03 PM
#1
WIPER BLADES / ARMS
Im having problems with driver side wiper blade or arm.
When in use, on the up sweep it clears the screen but when it goes back down it leaves an unwashed area.
Ive tried 2 different new sets of blades, checked the angle of the blade to the screen but still no difference. If I put a slight pressure on the arm {next to nothing} it clears the screen perfect.
Any ideas to fix this.
When in use, on the up sweep it clears the screen but when it goes back down it leaves an unwashed area.
Ive tried 2 different new sets of blades, checked the angle of the blade to the screen but still no difference. If I put a slight pressure on the arm {next to nothing} it clears the screen perfect.
Any ideas to fix this.
31 March 2009, 04:33 PM
#4
Scooby Regular
iTrader: (7)
Join Date: Mar 2009
Location: Down West.
Posts: 3,843
Likes: 0
Received 0 Likes
on
0 Posts
I had them, thought they were no good, put Bosch spoilers(both sides) from halfords - no problems now, I had lifting issues with these, failing that maybe the inner spring tension is shot ??
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM