Hi guys sorry if this has been asked before but what is the max out put of a td04 tubby at say 1.2bar pressure in the various housing sizes?

Also when will these be at maximum boost ie 2500rpm or higher.

This is for a celice gt4 so trying to gauge if this would be a good upgrade for me or not.

Thanks in advance

Chris

 

st205 or 185?On a scoob its around the 280 mark for a tdo4.id look to fensport for a tubby for a 4 mate

 

bu my vf22 and your goood for up to 330 bhp with mods 180.00

 

Fensport charge alot though mate, ideally im wanting about 330/330 with quick spool @ 1.2bar max which is a lot to ask. Its a st205. The stock can produce 330bhp but not the same in torque but much more than this and it turns into a hot air blower. Looking to make the output at a low boost pressure ideally.

Will the vf22 be a direct swap?

Chris

 

the max i got out of a td04 on a scoob was 285bhp/290ft/lbs torque about max and that was at 1.2 bar , reckon a td05 will be more up your street will make 330/330.

 

sorry to jump in on your thread,

as title really just need to know what it runs standand and is there a list of whats on what i.e sti ect.
cheers.

 

saloon = TD05H
wagon = TD04L