DRIVING LIKE A BAG OF NUTS PLEEASE HELP
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
DRIVING LIKE A BAG OF NUTS PLEEASE HELP
COULD SOME ONE PLS PLS HELP SORT THIS PROBLEM I FEEL LIKE I HAVE
I have a 95 wrx it has now been parked up for a week but prior to that it had been running fine.
I came to my mums and and parked up the car fine, then when i was leaving i started car up and drove and when i reached about 3500 revs it started to hesitate immensley , i then changed gear and it drove fine until it hit to 3000 in second its like this in all gears i connected the plugs and it came up with code 32 which on my chart that came with the car when i bought it shows the 02 sensor. on my car it seems to have 2 of these, one is down from the turbo d/p and the other down on the middle section i am not sure what this is for i think its by the cat??
the car seems to rev fine at standstill .
i have replaced the top o2 sensor by the turbo and the problem still seems to be there even after resetting the codes, i am at a standstill and need the car beck on the road for work ...
could some one please please shed some light on the situation as its makin me nuts and dont really wanna take it to a stealer if poss , or if some lives locally that can assisst i would be very grateful thanks.
Also if i do need the second sensor on the middle section of the exhaust any one know where i can get one from. its a lot slimmer that the one by turbo
I have a 95 wrx it has now been parked up for a week but prior to that it had been running fine.
I came to my mums and and parked up the car fine, then when i was leaving i started car up and drove and when i reached about 3500 revs it started to hesitate immensley , i then changed gear and it drove fine until it hit to 3000 in second its like this in all gears i connected the plugs and it came up with code 32 which on my chart that came with the car when i bought it shows the 02 sensor. on my car it seems to have 2 of these, one is down from the turbo d/p and the other down on the middle section i am not sure what this is for i think its by the cat??
the car seems to rev fine at standstill .
i have replaced the top o2 sensor by the turbo and the problem still seems to be there even after resetting the codes, i am at a standstill and need the car beck on the road for work ...
could some one please please shed some light on the situation as its makin me nuts and dont really wanna take it to a stealer if poss , or if some lives locally that can assisst i would be very grateful thanks.
Also if i do need the second sensor on the middle section of the exhaust any one know where i can get one from. its a lot slimmer that the one by turbo
#4
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I havent made any recent mods and i also forgot to mention that this is my first scoob and i also dont know my way round THIS car, i am ok when it comes to mechanics tho, so if any one can give me advice could you also pls tell me where i should be looking for these thanks v much...
#6
Scooby Regular
iTrader: (7)
Join Date: May 2006
Location: Stafford, ST16
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
check for splits in pipes or places where pipes should be.
i've seen loads of scoobs with split pipes around the intercooler area.
ooh, what fuel are you running as a mate put texaco in my old one once and it was very rough
i've seen loads of scoobs with split pipes around the intercooler area.
ooh, what fuel are you running as a mate put texaco in my old one once and it was very rough
#7
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
been using shell optimax and tesco super and it also has a front mounted inter cooler all pipes seem o be intact could it possibly be the other sensor further down the exhaust?
my air filter is covered fine as the bonnet vents still have the covers on them...... this car is really givin me a head ache
my air filter is covered fine as the bonnet vents still have the covers on them...... this car is really givin me a head ache
Trending Topics
#8
Scooby Regular
iTrader: (2)
Join Date: Dec 2004
Location: Who are you ? the tax man!
Posts: 2,035
Likes: 0
Received 3 Likes
on
2 Posts
It's causing trouble under load, could be MAF related. Try un plugging the sensor you hav'nt replaced and if its still the same then its that sensor. If not try cleaning the MAF screen and carefully the MAF hot wire itself
#10
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
hi webby i did dis connect the sensor earlier the one that i havent replaced and it did the same and was no different also how and with what can i clean the maf screen and hot wire thanks....
#12
Scooby Regular
iTrader: (2)
Join Date: Dec 2004
Location: Who are you ? the tax man!
Posts: 2,035
Likes: 0
Received 3 Likes
on
2 Posts
If its the same disconnected as when its disconnected then thats your fooked sensor. As its running the same either way. If you need to clean the maf , really start with just the screen and then with the HW itself, you need to undo it from the air intake and spray it with a non sticking cleaner, like brake cleaner. Just a quick couple of blasts should do. Dont stick oe prod anything in.
#13
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
thanksfor yr reply webby right i will try cleaning it in morning as for the second sensor does any one know of where i can get one from at a good price or does some one have a spare one its the thinner version to the one by the turbo down pipe thanks
#14
Scooby Regular
iTrader: (2)
Join Date: Dec 2004
Location: Who are you ? the tax man!
Posts: 2,035
Likes: 0
Received 3 Likes
on
2 Posts
If youve got your old snsor, put it in place of the sensor you never changed and see if that works, as it seems strange, but can happen, that both go down. Seems very fuel/emissions related, especially as it happens under load
#16
Scooby Regular
iTrader: (2)
Join Date: Dec 2004
Location: Who are you ? the tax man!
Posts: 2,035
Likes: 0
Received 3 Likes
on
2 Posts
Im sure you can get them for about £48 and less, trouble is your still running a cat and that can throw up probs, but try the sensor and maf first, Also can you get the ECU reset as it will still have the originall fault logged
#17
Scooby Regular
Join Date: May 2009
Location: Warwickshire
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
i had simular problems to yourself, MY00 had almost a missfire around the time the turbo clicked in, or sometimes felt like fuel starvation.
After a lot of messing around with various things putting a new 02 sensor on fixed it. Cost around £100.
After a lot of messing around with various things putting a new 02 sensor on fixed it. Cost around £100.
#18
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
i do have a full stainless, and a de cat and a stainless manifold if i was to put a de cat on what will be the benifit for that and also where would the 02 sensor go i have also reset the faults but its still comes back.
also l8 taa which 02 sensor was changed was it the one closest to the turbo or the one by the middle section..
also l8 taa which 02 sensor was changed was it the one closest to the turbo or the one by the middle section..
#19
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
You say it was parked up for a week and also has a front mount which leads me to believe you have some form of induction kit? Check the filter isnt wet. It may have had water dripping on it from the vent.
#20
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
parked up for week since fault came on mate it was runnin fine prior,i have checked filter and its dry its a k & n but when car comes on road its getting swapped with a hks green filter. also vents are still blanked off with original covers
#22
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
yeh turbotits i had it off today and it was dry as i said i have changed the o2 sensor that closest to the turbo but its still driving like theres a wall infront of car after 3500 revs so i will have to check the thinner sensor further down the exhaust and hope for the best. does any one have a spare that lives close by that may wanna sell?? or any idea where i can get one around my sides in huddersfield thanks
#24
95 wrx
Hi there.
Have you checked your plugs and coil packs? I just bought a 94 wrx and was doing the same thing. Lots of hesitation and coughing and spluttering under load, but would idle fine. After removing my plugs and coil packs, the plugs were gapped too big so I gapped them down and 1 of my coil packs was incorrect for the car and wasnt firing!!! It was exactly the same as the other 3 coilpacks but had a different part number. It was out of a subaru svx and wasnt compatible with the wrx. I knew the cylinder wasnt firing as the plug was soaked in fuel and and there was fuel in the oil. I changed that bad coil today with the correct one and she is running perfect now. Hope you get it sorted
Have you checked your plugs and coil packs? I just bought a 94 wrx and was doing the same thing. Lots of hesitation and coughing and spluttering under load, but would idle fine. After removing my plugs and coil packs, the plugs were gapped too big so I gapped them down and 1 of my coil packs was incorrect for the car and wasnt firing!!! It was exactly the same as the other 3 coilpacks but had a different part number. It was out of a subaru svx and wasnt compatible with the wrx. I knew the cylinder wasnt firing as the plug was soaked in fuel and and there was fuel in the oil. I changed that bad coil today with the correct one and she is running perfect now. Hope you get it sorted
#25
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: Chester
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
The second sensor is not a lamba sensor it is just the cat on fire , this sensor is not needed as when you decat there is no facility for this and you just unplug it as not required , the lamba sensor is ususally in the collector pipe before the up-pipe or in the downpipe after the turbo which you have changed .
Sounds like a coil pack failing under load common on a car of this age first check the plugs and inspect the coil packs for each plug would bet money one has hair line cracks and is failing under load .
Mark
Sounds like a coil pack failing under load common on a car of this age first check the plugs and inspect the coil packs for each plug would bet money one has hair line cracks and is failing under load .
Mark
#26
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
would it not be a maf????? as i chacked the faults today and it fired up the maf on the CEL then it gave code for the o2 sensor tried it again and then it just shows up o2 sensor again??? any advice please
#27
Scooby Newbie
Thread Starter
Join Date: Mar 2009
Location: west yorkshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
well to be on safe side i have ordered a maf for cheap and also have a set of coil packs for stand by but if it was coil pack would it not missfire??? how can you tell when coil pack is gone and is there a how to on the coil pack as my hands way too big to fit down side of block thanks
#28
Scooby Regular
iTrader: (13)
Also, as mentioned earlier, you sure your speedo doesn't stop working when driving?
#30
Scooby Regular
iTrader: (13)
Yeah, if any of the coilpacks have broken down then it will hold back or even missfire, etc.
The reson for the speedo idea is that if it stops working, then the gearbox sensor tells the ECU to limit revs to 4.5k rpm - although to be fair your hesitation is happening at 3.5k. But regardless, you've said it's working anyway.
The reson for the speedo idea is that if it stops working, then the gearbox sensor tells the ECU to limit revs to 4.5k rpm - although to be fair your hesitation is happening at 3.5k. But regardless, you've said it's working anyway.