Can someone explain my dyno results + other info needed
#1
Can someone explain my dyno results + other info needed
Hey all,
Please could you explain these dyno results, do they look okay?
I have only recently purchsed my WRX 03 and they guy said it had been re-mapped and looking at the results im quite sure it has?
But....
I talked to the guy who i brought it off and he said he took it to his friend who adjusted the boost ... and the engine management light came on then he adjusted it back ??!? Its my understanding that the ECU is the Ecutek type and must be unlocked to be able to adjust?
So im a bit confused here .... if it has been mapped then the ECU must have been unlocked, right? Am asking this as i would like to fit a new downpipe but i will need it mapped after and dont want to pay the full amount for unlocking (if it is unlocked already) etc... is there a way to find this info out?
Cheers!
Please could you explain these dyno results, do they look okay?
I have only recently purchsed my WRX 03 and they guy said it had been re-mapped and looking at the results im quite sure it has?
But....
I talked to the guy who i brought it off and he said he took it to his friend who adjusted the boost ... and the engine management light came on then he adjusted it back ??!? Its my understanding that the ECU is the Ecutek type and must be unlocked to be able to adjust?
So im a bit confused here .... if it has been mapped then the ECU must have been unlocked, right? Am asking this as i would like to fit a new downpipe but i will need it mapped after and dont want to pay the full amount for unlocking (if it is unlocked already) etc... is there a way to find this info out?
Cheers!
Last edited by Mr. WRX; 10 July 2009 at 12:00 PM.
#2
Scooby Regular
iTrader: (21)
Join Date: Oct 2008
Location: Whitby, North Yorkshire
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
You could have a manual boost controller?
Also, find out where it was originally mapped (maybe scooby clinic)? Then it will cost a lot less for a tweak of you map. Maybe around £150 depending where you go.
Also, find out where it was originally mapped (maybe scooby clinic)? Then it will cost a lot less for a tweak of you map. Maybe around £150 depending where you go.
#3
The torque curve is fairly flat but that is a good thing means it will hold torque through the mid range ,this is mostly cause it holds boost well till the end,the fueling is too rich though idealy should be round about 11.3 so i would get that sorted it wont kill your engine but u will be losing power and drinking fuel
#4
Im sure it hasnt got a Manual boost controller, so would you say its been mapped ... if so this would mean the ECU has been unlocked
**sorry for all the questions im quite new to all this this
**sorry for all the questions im quite new to all this this
#5
Scooby Regular
It is running rich, so would certainly benefit by getting it mapped.
An ECUTEK dealer will be able to tell you if it has a license on it already, by hooking up their laptop.
Ooops... just seen the post above.
An ECUTEK dealer will be able to tell you if it has a license on it already, by hooking up their laptop.
Ooops... just seen the post above.
#6
Cheers all
If i rang / emailed say..... Scoobyclinic could they could tell me if it has been mapped or not without hooking it up to there laptop as its quite far away?
If i rang / emailed say..... Scoobyclinic could they could tell me if it has been mapped or not without hooking it up to there laptop as its quite far away?
Last edited by Mr. WRX; 10 July 2009 at 12:39 PM.
Trending Topics
#8
Or does anyone know of an Ecuteck dealer close to Telford / Wolverhampton that i could get to check?
Edit - Just tried to phone JRS motorsport and they have closed down
Oh & with the AFR being waaaay out im still getting good mpg ... i topped it up the other week and have just gone past 300miles, off a tank ... thats with mixed driving with air con on alot!!
Last edited by Mr. WRX; 10 July 2009 at 02:46 PM.
#10
That would be awesome ! Would you be able to let me know what day and i will come and meet you? Or could i have your contact number please (is it on your website?)
Last edited by Mr. WRX; 10 July 2009 at 03:34 PM.
#11
anyone with a cable and laptop can tell if it has been ecuteked, as even if they are open ecu tuners, they will know if your ecu has an ecutek license on it. They won't be able to read it if it has a license on it.
#12
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Surely it wouldn't make that bhp without some sort of mapping ?
I did a fair bit to my car and it made an extra 20 bhp before mapping, and 75 bhp extra after mapping (STI)
IMHO of course.
dunx
I did a fair bit to my car and it made an extra 20 bhp before mapping, and 75 bhp extra after mapping (STI)
IMHO of course.
dunx
#13
The torque curve is fairly flat but that is a good thing means it will hold torque through the mid range ,this is mostly cause it holds boost well till the end,the fueling is too rich though idealy should be round about 11.3 so i would get that sorted it wont kill your engine but u will be losing power and drinking fuel
sorry but 11.3 is very lean, i would bring it down to tens when on boost
#16
#17
Just an update for everyone:
JGM very kindy popped across to check it had been remapped and........................ it hasnt been but he said it was kicking out good BHP considering it hadnt been
So i could get it remapped and gain a bit of power, adding a downpipe too.
JGM said the turbo only takes realisticly 285bhp and I dont really wonna be swopping it yet (unless my turbo goes in the future)
Hmmm im thinking now would it be worth getting it remapped for the extra 15ish bhp ?
JGM very kindy popped across to check it had been remapped and........................ it hasnt been but he said it was kicking out good BHP considering it hadnt been
So i could get it remapped and gain a bit of power, adding a downpipe too.
JGM said the turbo only takes realisticly 285bhp and I dont really wonna be swopping it yet (unless my turbo goes in the future)
Hmmm im thinking now would it be worth getting it remapped for the extra 15ish bhp ?
#18
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Yes it is worth mapping, its not all about BHP, this is where lots of people think it is, its about drivability and in gear accelleration (ie torque).
You could gain another 20-30lbs of torque there, you wouldnt believe the difference it would make, imagine you making 270lbs at 3500rpm instead of 230ish then holding that further up the rev range (say 500rpm more before dropping off), will make the car feel totally different
Tony
You could gain another 20-30lbs of torque there, you wouldnt believe the difference it would make, imagine you making 270lbs at 3500rpm instead of 230ish then holding that further up the rev range (say 500rpm more before dropping off), will make the car feel totally different
Tony
Thread
Thread Starter
Forum
Replies
Last Post
mistermexican
Engine Management and ECU Remapping
11
13 September 2015 08:10 PM
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM