I have got a blub out behind the speedo, how easy is it to get them out n replace them, and also the red pin has blown or got a problem aswell, could anyone tell me has this happened with you and what has to be done to get that working, is it a new pin or blub behind it, and will I alter anything If it gets removed.
Any help wellcome, even If its just how to get to the dash boird out for me to have a look, as I havent done that, thank you Jamie

 

on the classic; 4 screws hold dash surround,4 hold colomn surround, 4 hold clocks in,then speedo drive just pulls off not forgetting the 3 loom plugs that plug into back of clocks...start from the left side of clocks to take light plugs out...bulbs are twist fit