Whining and Vibration since Beam bushes changed!???
#1
Whining and Vibration since Beam bushes changed!???
pre MOT take the car into garage for 2 powerflex rear beam bushes and a o/s/r wheel bearing as the bushes were propper ****ed and the bearing had a fair bit of play.
got the car back and feels much better handling wise but has developed a whining noise (accompanied with an vibration throughout the car) and seems to be coming from the rear.
The noise and vibration is worse letting off from about 3000 revs.
Something just dont feel right and will be taking it 2 the garage as soon as i get chance, but that wont be in the next 2 weeks so.
any ideas so i could have a look at me self.?
cars a 98
cheers
got the car back and feels much better handling wise but has developed a whining noise (accompanied with an vibration throughout the car) and seems to be coming from the rear.
The noise and vibration is worse letting off from about 3000 revs.
Something just dont feel right and will be taking it 2 the garage as soon as i get chance, but that wont be in the next 2 weeks so.
any ideas so i could have a look at me self.?
cars a 98
cheers
#3
Scooby Senior
iTrader: (3)
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
You are just hearing more noise due to the harder bushes, my gearbox whines after fitting uprated engine and gearbox mounts, well at least I can now hear it.
HTH
dunx
P.S. It may be worth a check of the rear diff. just in case....
HTH
dunx
P.S. It may be worth a check of the rear diff. just in case....
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 11:49 AM