WHAT KIND OF BLOCK IS MINE
#2
Should be a Ej207 type block this is a thick walled semi closed block. You could run this as a 2.1 upgrade.
But you will find most tuners will suggest a Closed Deck Block is used which can be had from the tuner you choose to use.
Alternatively speak to Engine Tuner who have build many 2.1's for various Scoobynetters.
Good Luck
But you will find most tuners will suggest a Closed Deck Block is used which can be had from the tuner you choose to use.
Alternatively speak to Engine Tuner who have build many 2.1's for various Scoobynetters.
Good Luck
#3
Although a CDB would be preferable as a base, I understand even the 'weakest' OBD is still good for around 500bhp, iirc! So a SCDB should be able to handle even more power, reliably,
Depends on your goal/future goals(?)...
Depends on your goal/future goals(?)...
Last edited by joz8968; 20 November 2009 at 09:34 PM.
#4
I am thinking of no more than 500bhp eventually ,just want to make sure the engine can handle it with relative ease .
Just trying to make something bullet proof.
Just trying to make something bullet proof.
#5
I'm sure a SCDB - if that's what your MY has - will be more than up to the task.
As Baly says, API Dave will be able to tell you all you'll need to know re anything Subaru, and point you in the right direction. PM/email him...
As Baly says, API Dave will be able to tell you all you'll need to know re anything Subaru, and point you in the right direction. PM/email him...
#7
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
SCDB will be perfectly adequate for the level of performance you want.
Our 2.1 has proven very popular, have a chat with some of our happy customers and give us a call, or better still pop down and sample the Devon air.
https://www.scoobynet.com/private-sa...type-r-8k.html
https://www.scoobynet.com/members-ga...-2-1-s206.html
https://www.scoobynet.com/projects-4...ry-so-far.html
Our 2.1 has proven very popular, have a chat with some of our happy customers and give us a call, or better still pop down and sample the Devon air.
https://www.scoobynet.com/private-sa...type-r-8k.html
https://www.scoobynet.com/members-ga...-2-1-s206.html
https://www.scoobynet.com/projects-4...ry-so-far.html
Trending Topics
#9
Thanks for all the info guys ,i will be contacting some of you in the near future .
Can anyone give me a ball park figure for a drive in drive out for the 2.1 so i can start thinking about funds etc.
Can anyone give me a ball park figure for a drive in drive out for the 2.1 so i can start thinking about funds etc.
#10
I would speak to Engine tuner and API for cost, both guys have posted on the thread mate.
Wayner very reputable guys indeed API and Enginetuner. Speak to them directly and see who you fancy going with. But you will get a solid build for your money and not something that you will end up rebuilding again because somebody didn't build it properly. Do it once and do it properly is what i say.
Good Luck
Wayner very reputable guys indeed API and Enginetuner. Speak to them directly and see who you fancy going with. But you will get a solid build for your money and not something that you will end up rebuilding again because somebody didn't build it properly. Do it once and do it properly is what i say.
Good Luck
#12
Thread
Thread Starter
Forum
Replies
Last Post
bluebullet29
General Technical
9
05 October 2015 02:17 PM