Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Clutch change impreza 2000 awd

Thread Tools
 
Search this Thread
 
Old 13 December 2009 | 04:02 PM
  #1  
Paulgeorge01's Avatar
Paulgeorge01
Thread Starter
Scooby Regular
 
Joined: Dec 2009
Posts: 150
Likes: 3
Question Clutch change impreza 2000 awd

I am the proud owner of a 1999 impreza 2000 awd turbo. It has done a 104,000 miles with no clutch change to date. I know this because i have owned the car since it was a year old. I think the clutch might be on it's way out, it is not actually slipping yet but there is a clicking noise coming from the pedal when i engagae the clutch. I recently towed a 2.5 ton transit van & could smell burning ferado after the 10 mile tow. There was no clicking noise coming from the clutch pedal prior to this tow.

Is there any way you can inspect the available clutch ferado remaining?
I know you have clutch wear indicators on commercial vehicles.

How long would it take a competent mechanic to change a clutch on this vehicle?

What would be the average labour charge for this job?

Roughly how much would a replacement clutch cost?

Any help with the above questions would be very much appreciated. Thank you.

Old 13 December 2009 | 04:10 PM
  #2  
WhiteWagonMan's Avatar
WhiteWagonMan
Scooby Regular
iTrader: (34)
 
Joined: Apr 2009
Posts: 1,419
Likes: 0
From: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Default

YOU DID WHAT?..SELL THE CAR TO SOMEONE WHO DESERVES TO OWN IT AS YOU CLEARLY DO NOT.
Old 13 December 2009 | 04:14 PM
  #3  
clark822's Avatar
clark822
Scooby Regular
 
Joined: Dec 2008
Posts: 374
Likes: 0
From: Smelly poke birmingham
Default

If you check the traders section i think harvey is doing a excedy for about 150 for the clutch and about 200 for fitting which seems to be the average labour charge what you like at diy ?
Old 13 December 2009 | 04:20 PM
  #4  
bolasti's Avatar
bolasti
Scooby Regular
iTrader: (6)
 
Joined: Sep 2009
Posts: 1,090
Likes: 0
From: BANBURY OXFORDSHIRE
Default

me and my pal done mine had the advantage of haning a lift right old job hardest bit geting box back in they sell exedy clutch on ebay thats where got mine and all is good best of luck
Old 13 December 2009 | 04:42 PM
  #5  
Paulgeorge01's Avatar
Paulgeorge01
Thread Starter
Scooby Regular
 
Joined: Dec 2009
Posts: 150
Likes: 3
Default

Originally Posted by WhiteWagonMan
YOU DID WHAT?..SELL THE CAR TO SOMEONE WHO DESERVES TO OWN IT AS YOU CLEARLY DO NOT.
I know that towing the van is bad to say the least but it was my van & i needed it for work the next day.
Old 13 December 2009 | 04:49 PM
  #6  
Paulgeorge01's Avatar
Paulgeorge01
Thread Starter
Scooby Regular
 
Joined: Dec 2009
Posts: 150
Likes: 3
Default

Originally Posted by clark822
If you check the traders section i think harvey is doing a excedy for about 150 for the clutch and about 200 for fitting which seems to be the average labour charge what you like at diy ?
Thanks very much for the information. D.I.Y. is not an option for me. cheers. I am brand new to this site today so excuse my lack of site knowledge but where is the traders section on this site.
Old 13 December 2009 | 04:51 PM
  #7  
Paulgeorge01's Avatar
Paulgeorge01
Thread Starter
Scooby Regular
 
Joined: Dec 2009
Posts: 150
Likes: 3
Default

Originally Posted by bolasti
me and my pal done mine had the advantage of haning a lift right old job hardest bit geting box back in they sell exedy clutch on ebay thats where got mine and all is good best of luck

Thanks for your reply.
Old 13 December 2009 | 06:45 PM
  #8  
Aztec Performance Ltd's Avatar
Aztec Performance Ltd
Former Sponsor
iTrader: (234)
 
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Default

AZTEC PERFORMANCE ONLINE STORE - WHOLESALE PRICES DIRECT TO THE PUBLIC for clutches

My clutch clicks, and always has done as long as I can remember. Your clutch won't need replacing until it starts slipping imho.
Old 15 December 2009 | 01:12 AM
  #9  
Paulgeorge01's Avatar
Paulgeorge01
Thread Starter
Scooby Regular
 
Joined: Dec 2009
Posts: 150
Likes: 3
Default

Thank you for your information.
Old 15 December 2009 | 02:29 PM
  #10  
Aztec Performance Ltd's Avatar
Aztec Performance Ltd
Former Sponsor
iTrader: (234)
 
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Default

No probs
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DJZsti
Subaru Parts
5
08 February 2019 07:41 PM
Uncle Creepy
Other Marques
43
27 December 2015 04:02 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
Cunliffe
ScoobyNet General
2
18 September 2015 07:36 PM



Quick Reply: Clutch change impreza 2000 awd



All times are GMT +1. The time now is 06:23 PM.