remapping noob and header info
#1
remapping noob and header info
hi
im looking for a good company to remap my 51 plate bugeye in the boston/lincoln area thats not going to screw me over. anyone in this area have any ideas. also i have got hold of a set of headers for me scooby but now reading on the box ej20 headers am i correct that mine will be ej205. is the same will they fit??
help
thanks
chris
im looking for a good company to remap my 51 plate bugeye in the boston/lincoln area thats not going to screw me over. anyone in this area have any ideas. also i have got hold of a set of headers for me scooby but now reading on the box ej20 headers am i correct that mine will be ej205. is the same will they fit??
help
thanks
chris
Trending Topics
#12
hi cockneymfc nice to see somong close to me on net. in only at boston so hope see you sometime in sommer up skeg!!!
dnyamix looks like when i get this header sorted ill be on to you for a map.
#15
Scooby Regular
iTrader: (2)
Join Date: Nov 2009
Location: skegness
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
yes chris if you are up for it we could get duncan to mapp our cars at the same time.....how soon are you up for remapp ive got a few bits to do to mine as soon as the weather gets better
Last edited by cockneymfc; 10 March 2010 at 03:51 PM.
#16
Former Sponsor
iTrader: (48)
All headers M/Y 93-05 are interchangeable.
93-96 are bulbous design with lambda at the collector.
97-00 are slim line. No lambda at the collector.
01-05 are slimline but with a lambda hole at the collector.
Avoid one piece after market header and uppipe sets or anything with a woven flexi joint as these tend to fail at an early stage.
93-96 are bulbous design with lambda at the collector.
97-00 are slim line. No lambda at the collector.
01-05 are slimline but with a lambda hole at the collector.
Avoid one piece after market header and uppipe sets or anything with a woven flexi joint as these tend to fail at an early stage.
#17
All headers M/Y 93-05 are interchangeable.
93-96 are bulbous design with lambda at the collector.
97-00 are slim line. No lambda at the collector.
01-05 are slimline but with a lambda hole at the collector.
Avoid one piece after market header and uppipe sets or anything with a woven flexi joint as these tend to fail at an early stage.
93-96 are bulbous design with lambda at the collector.
97-00 are slim line. No lambda at the collector.
01-05 are slimline but with a lambda hole at the collector.
Avoid one piece after market header and uppipe sets or anything with a woven flexi joint as these tend to fail at an early stage.
thanks harvey. i changing plans as the header i have will fit like i was told but look like the subframe need mods . s im going bk to wat i have and just changing the up pipe. then at some point may see about these ported ones. witch up pipe is best any makes better than other. as i only seam to find up pipe with flex joints??
thanks chris
#18
witch up pipe is best any makes better than other. as i only seam to find up pipe with flex joints??
Last edited by Splitpin; 15 March 2010 at 03:11 PM.
#21
spark plugs heat grade 7 ngk iriduams?? cant spell that anyone now the part number for them as my local factor sells them just doesnt have a listing for my 2001 bug eye wrx?
anyone??
anyone??
#26
thank you
just had them on phone there saying irduam plugs start with a i? and that NGK PFR7B are platium plugs.
or is the factor talk from the cows beehide?
sorry i also didnt say i belive i need these for the remap
my spec
bugeye
3 turbo back
sti up pipe
cosworth air filter
just had them on phone there saying irduam plugs start with a i? and that NGK PFR7B are platium plugs.
or is the factor talk from the cows beehide?
sorry i also didnt say i belive i need these for the remap
my spec
bugeye
3 turbo back
sti up pipe
cosworth air filter
#28
hi guys im also been intouch with duncan he is going to map mine to i also live in boston be good for us three to have them mapped on the same day if duncan can do this just need to get my vf29 turbo and pink injections fitted this weekend and mine should be just about ready for the mapping 330bhp here i come
#29
sounds good
thanks for above duncan.plugs are at work waiting to be fitted this weekend just waiting for the dam air filter to turn up. sounds like yours (lee) will be a little more agresie than mine. still nice to now there people near by!!
thanks for above duncan.plugs are at work waiting to be fitted this weekend just waiting for the dam air filter to turn up. sounds like yours (lee) will be a little more agresie than mine. still nice to now there people near by!!