beezor

iTrader: (1)

Howdy folks i tried 2 fit a godspeed set up 2 my 95 wrx 2day but once it was on the calipers were rubbing on my alloys which are oz racing 17" rims-the same as wrc1's-any offers on why they dont fit as i thought they would clear 17's

joz8968

iTrader: (13)

Your alloys probably have a very shallow offset (high ET in mm) i.e. the wheels' mating hubs are close/flat to the spokes. This will bring the wheels well within under the arches, causing the back of the spokes to foul the calipers.

The ET number should be stamped on the wheel somewhere... I expect it'll be in excess of circa ET55+...

happydude303

iTrader: (1)

you could put some spacers on there im about to fit these brake on my 17 rays se37 i hope they fit hummm

Myles

iTrader: (40)

We are all in the same boat then! Hope it aint the Titanic!

happydude303

iTrader: (1)

it would be just my luck but then i would go for a spacer as im not getting rid of my rays there to nice

bigsinky

godspeed brembo kit with 335mm rotors fit under my 17" superTs no probs.

jayallen

iTrader: (31)

The offset wasnt the problem, the caliper was touching the inside of the rim...Looks like a wheel change Beez.

Myles

iTrader: (40)

Its quite close on OEM 17inch newage alloys, but it will clear. I fitted mine today, good bit of kit!