wonder if any one can help me ... i have a subaru 200 4x4 with the normal seats im looking to fit a pair af 4 point harness seat belts can this be done and if so do i need to buy anything else to fit them ...

 

4 point harness with OE seats is a no no

 

why is that then

 

Depends which seats exactly, and where you intend to mount the shoulder straps.

The shoulder straps should be fitted so they slope downward about 10-20 degrees from horizontal.

A lot of people mount the straps in the lower bolt holes on the rear bench. THIS is the real no no !! The angle of the straps will cause the belt to pull down on your spine in case the unthinkable happens.

The sport seats in many WRX's and STi's, with the holes for shoulder straps, are suited for 4 points.

The softer seats, found in some models will not work well with 4 points.

I welded in plates in the boot, to accomate the bolts for the straps.

http://img.photobucket.com/albums/v6...s/DSCN0830.jpg

 

hi m8
what you need is a harnessbar like the one i have then a four point harness will fit great i think revolution 24/7 sell them
cheers jim

 

I have a 4 point harness with my original seats. You need the bolts to fix the harness to and they fit in all the existing seatbelt mounts