Had ago the other day with the Mrs Hair Dryer. Came off ok but was left with the Letter Marks Etc.

Tried T-Cut but no joy.

What have you lot used?

Was thinking of that Bug/Tar Remover from Halfords


Cheer's Guys

 

Wet flat it with 1500 girt and some soapy water and polish back with a cutting paste.

 

Did mine last weekend, removed excess glue with tar remover and then gave a good polish, you can still see where the wrx was but not the rest going to have a go with a machine polisher.

 

i used thinners and a lot of elbow grease and wax

 

shall we have a go on saturday craig

 

Be very careful if you try thinners you could take the paint off.

Are you trying to get the glue off or the letters you can see in the paint.
If its the glue then a little drop thiners or tar remover i used panel wipe. If its the writing you can still see then the wet flatting and cutting works perfect.

 

i used bit white spirit on a vectra and it removed the "ghosting" fairly easy

 

craig

if you use a bit of my acetone i use for cleaning before flocking it will get it off i about 2 secs

drop me a pm if you want to pop round and you can either do it at mine or take a bit with you.