When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
had this gauges fitted for a while now, all i have is the wires out of the back, wot would i need to get these working? heard of sandwich plates but would prefer not to go down that route, fitted to a 1993 wrx.
hi bud, for the correct temp and pressure you need
3rd cylinder bung from ebay £5.95
remote oil pressure lead about £20
the 3rd cylinder bung goes above no:3 and you oil temp sender screws into that,
the remote is a braided hose about 12" long with a 1/8 npt fitting on 1 end and a billet machined with 2 threaded holes for the factory prssure switch and your pressure switch for the gauge.
yep thats all you need, when it comes to fitting there is loads of how to's on here if you do a search, but it an easy job, temp at the back pressure at the front
got pipe and fixings through post today, but one thing i or no one noticed i need senders lol, do i buy same make as my gauges? or are they universal ones.
19 May 2010, 06:58 PM
