Fault Code 12 & 22 Showing on CEL
#1
Fault Code 12 & 22 Showing on CEL
Hi all
On my way home tonight CEL came on for a split second so run the fault check and its showing 12 = Starter Switch & 22 = Knock Sensor
Cars running perfect so not sure whats goin on
Can anyone shine some light on the problem ie wheres the starter switch and could that trigger the knock sensor
Ps cars a My99 Uk Wagon with standard spec
Thanks Andy
On my way home tonight CEL came on for a split second so run the fault check and its showing 12 = Starter Switch & 22 = Knock Sensor
Cars running perfect so not sure whats goin on
Can anyone shine some light on the problem ie wheres the starter switch and could that trigger the knock sensor
Ps cars a My99 Uk Wagon with standard spec
Thanks Andy
#2
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Starter switch is when you crank the engine on starter motor.
Most likely failing knock sensor and other code is just an old random code.
Try reset to clear them and see if anything reoccurs.
Most likely failing knock sensor and other code is just an old random code.
Try reset to clear them and see if anything reoccurs.
#3
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM