how to identify sti 5 heads & sti 2 heads
26 June 2010 | 03:30 PM
#1
how to identify sti 5 heads & sti 2 heads
i have aquired a full engine with a bottom end knock, was told its a sti 5, how do i identify the heads, also been given some other heads, was told they are sti 2 again how do i identify them, many thanks.
26 June 2010 | 09:20 PM
#2
Scooby Regular
iTrader: (9)
Joined: Sep 2007
Posts: 284
Likes: 0
From: Reading,in a 516/460 classic 2.0 wagon quite lively!!
The sti 5 heads will have shims under the bucket(so will look like solid lifters from the top) and the bolts that hold the inlet manifold go diagonally across each inlet port as opposed to all 4 in a straight line.Not sure about sti2 heads..
27 June 2010 | 09:09 AM
#3
Former Sponsor
Joined: Dec 2005
Posts: 1,658
Likes: 0
From: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Version 2 will have hydraulic lifters, Some version 2 Ra may have top hat shims iirc.
Last edited by Slowboy Racing; 27 June 2010 at 09:41 AM.
27 June 2010 | 01:51 PM
#4
think they are v3/4 sti heads as they have under bucket shims, but inlet bolt holes are in a straight line.
http://i2.photobucket.com/albums/y2/.../Image0016.jpg
http://i2.photobucket.com/albums/y2/.../Image0017.jpg
http://i2.photobucket.com/albums/y2/.../Image0018.jpg
http://i2.photobucket.com/albums/y2/.../Image0016.jpg
http://i2.photobucket.com/albums/y2/.../Image0017.jpg
http://i2.photobucket.com/albums/y2/.../Image0018.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
