So my 93WRX is finally getting the final bits fitted and then mapped!! woohoo

Getting 550 injectors fitted, Apexi PFC with commander, 22B MAF and FPR plumbed in!

hoping to see around 325BHP if the clutch holds out!!

Supporting mods already fitted are FMIC, induction kit, high pressure fuel pump, tubular manifold / up pipe, open neck downpipe, 2.5" ninja exhaust and avc-r.

Dave

 

I would upgrade the brakes before you get her mapped tbh, the 2 pots are pathetic you need a minimum of 4 pots with upgraded discs/pads or after market calipers/discs, you can cook the 2 pots with a few hefty stops, not good with 237bhp let alone 320bhp

Tony

 

Currently have coilovers and 4 pots as well. Not great but ok. Last roaded at 301bhp and have survived so far!

Also rear ARB.

Dave

 

Cool mate, im getting my 93 wrx mapped next week, got a similar setup but only 440 injectors, currently dynoed at just under 296bhp.

what turbo are you running? let me know how you get on!

 

I have a TD05 on there, its a big laggy but i dont really mind that I'll get a pic of the RR when its done!

dave

 

same turbo as me, fingers crossed you get a good output. Did you manage to get an Apexi Boost map sensor?

 

I was told the AVC-r boot controller was all i would need?

 

Dropped it off this morning! fingers crossed nothing breaks

 

Faulty MAF has halted mapping! (didn't even get started) hoping to get replacement and mapped by next week now!

 

Its finally done, 320bhp nd 305lb torque, picking it up later!

 

nice stats mate

 

Cool! I managed 329bhp at 1.3bar, was very pleased, although my Controller seems to be playing up, just has the "Apexi" logo on it

 

Mine was done at 1.2 bar so quite happy with that although i am having troubl;e with the avcr holding boost. seems to fluctuate a bit, maybe feedback settings?

 

knocked back the feedback to 3 and seems to be better

 

I think that means you have a non-matching model year controller with respect to your model year of PFC.