Questions for the mappers
22 July 2010 | 04:32 AM
#1
Thread Starter
Scooby Regular
Joined: Aug 2003
Posts: 350
Likes: 0
Questions for the mappers
1. Does swapping a Power Station supplied and fitted 3 port boost solnoid for a Prodrive one require a remap?
2. If I swap back to a standard airbox from an RCM Induction kit does that require a remap?
Car is 2003 STI with previously mapped ecutek
Cheers
2. If I swap back to a standard airbox from an RCM Induction kit does that require a remap?
Car is 2003 STI with previously mapped ecutek
Cheers
22 July 2010 | 07:23 AM
#2
Yes it will for definite.
22 July 2010 | 08:27 AM
#3
Thread Starter
Scooby Regular
Joined: Aug 2003
Posts: 350
Likes: 0
[QUOTE=dynamix;9508025]Possibly not but I would at least want to check the map to make sure it is working the same - why the change ?
Ta for the reply, I've been looking out for a different 3 port since I had it re-mapped, mapper commented the 3 port was showing characteristics he had come across before with one from Power Station. Doesn't seem to hold the boost very well. He could have mapped it out but would have affected the power, I chose to live with it but my wife drives it and just doesn't suit her driving style so I'll get the prodrive one on them back to the mapper to sort.
Ta for the reply, I've been looking out for a different 3 port since I had it re-mapped, mapper commented the 3 port was showing characteristics he had come across before with one from Power Station. Doesn't seem to hold the boost very well. He could have mapped it out but would have affected the power, I chose to live with it but my wife drives it and just doesn't suit her driving style so I'll get the prodrive one on them back to the mapper to sort.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM