Notices

Starts but only just.

Thread Tools
 
Search this Thread
 
Old 23 July 2010, 05:14 PM
  #1  
rudboy
Scooby Regular
Thread Starter
 
rudboy's Avatar
 
Join Date: Jul 2010
Location: Montrose
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Default Starts but only just.

Hi,

got some serious issues with my motor not wanting to start,
its a 95wrx with a red top engine,
its as if its over fuelling as when it eventually does starts its backfiring and spitting back and generally running like a bag of bolts,
have tried swapping the Maf,
Ecu,
Lambda sensor,
and checked operation of a few other sensors, all seem to be in working order.
new plugs were fitted about 200 miles ago, also the decat pipe was removed at this time.(mot Due)

does anyone know where i can access a ecu wiring diagram??

help appreciated.

Last edited by rudboy; 23 July 2010 at 05:15 PM.
Old 23 July 2010, 05:57 PM
  #2  
Glowplug
Scooby Regular
iTrader: (8)
 
Glowplug's Avatar
 
Join Date: Jan 2008
Location: On The Road!
Posts: 5,027
Likes: 0
Received 0 Likes on 0 Posts
Default

Could be one of the many sensors that is fubard, have you done the diagnostic check??

How to and ECU pinouts here
Old 23 July 2010, 06:12 PM
  #3  
rudboy
Scooby Regular
Thread Starter
 
rudboy's Avatar
 
Join Date: Jul 2010
Location: Montrose
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah Mate,
Done the diagnostic check but nothing coming up at all,
my mechy is pretty competant, i sctually bought the car from him 3 years ago, pretty much trouble free motoring since, until now that is........
just getting to the stage that we are getting stuck between a rock and a hard place now tho after checking sensor after sensor, i take it the sensors have an operating range? out with this they should show a fault im guessing? is there any failing sensors that wouldnt show on the diagnostic check?

Cheers,

thanks for the ecu link. b13bat

Last edited by rudboy; 23 July 2010 at 06:19 PM.
Old 24 July 2010, 02:09 PM
  #4  
rudboy
Scooby Regular
Thread Starter
 
rudboy's Avatar
 
Join Date: Jul 2010
Location: Montrose
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Default

anyone else got any ideas????

desperatlly needing help,
Old 24 July 2010, 02:11 PM
  #5  
Sabas
Scooby Regular
iTrader: (22)
 
Sabas's Avatar
 
Join Date: Nov 2008
Posts: 1,124
Likes: 0
Received 0 Likes on 0 Posts
Default

There seems to be a lot experiencing these problems lately, but with no real answers
Old 24 July 2010, 04:46 PM
  #6  
happydude303
Scooby Regular
iTrader: (1)
 
happydude303's Avatar
 
Join Date: Mar 2009
Location: southampton
Posts: 1,589
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah i now the feeling but mine only does it first time it start it takes a few seconds and then is fine every time i start until the next morning, no power loss no bag of bolts just a weird
Old 24 July 2010, 04:54 PM
  #7  
Glowplug
Scooby Regular
iTrader: (8)
 
Glowplug's Avatar
 
Join Date: Jan 2008
Location: On The Road!
Posts: 5,027
Likes: 0
Received 0 Likes on 0 Posts
Default

As you have no CEL or fault codes showing, I would be taking the plugs out and checking the condition and gaps (0.8mm) and checking all leads and coil packs. It will take you an hour tops, gotta be worth a look
Old 24 July 2010, 06:27 PM
  #8  
RMCG
Scooby Newbie
 
RMCG's Avatar
 
Join Date: May 2010
Location: Aberdeen
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by happydude303
yeah i now the feeling but mine only does it first time it start it takes a few seconds and then is fine every time i start until the next morning, no power loss no bag of bolts just a weird
That is what mine's is like dude, p***es me off, turn key turns over rough, turn key off, then turn again and fires up perfect,
Old 24 July 2010, 07:51 PM
  #9  
satpink
Scooby Regular
iTrader: (9)
 
satpink's Avatar
 
Join Date: Sep 2004
Posts: 2,202
Likes: 0
Received 0 Likes on 0 Posts
Default

does it bump start? if it does could be crank or cam sensor, take them out & give them a clean
Old 25 July 2010, 11:57 AM
  #10  
rudboy
Scooby Regular
Thread Starter
 
rudboy's Avatar
 
Join Date: Jul 2010
Location: Montrose
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Default

Aye the plug gaps were checked prior to them getting fitted 200ish miles ago,
Not sure if it bump starts as its been in my mechys garage for last 2 weeks.
It all started one afternoon when i went to start it from cold and it didnt want to start, as a mate had Maf issues and his symptoms sounded similar i thought i would try and un plug it to see what like. started no bother, drove 1 mile down the road sand it started back firing, poping as it were over fuelling, pulled over, plugged Maf back in and no difference so managed to drive it a few miles home and it sat for 2 days until the mechy picked it up, He managed to drive it the 2 miles to his garage but only just, and now it bearly starts but when it does its rough as F**k, popping, and backfiring,

Heads done in with it, but in fairness not as much as my mechys..............

Cheers for the input.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 07:12 PM
SilverM3
ScoobyNet General
8
24 February 2021 01:03 PM
toyney83
General Technical
10
02 October 2015 08:38 PM
T.K
General Technical
10
02 October 2015 11:35 AM
ALEXSTI
General Technical
5
28 September 2015 09:29 PM



Quick Reply: Starts but only just.



All times are GMT +1. The time now is 10:36 PM.